How much should I pay?
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: irvine, ca, US
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
How much should I pay?
Have a b18c1 gsr motor with a 98 type R 4-1 header. Getting ready to go have 2.5" piping run all the way back with no cat. How much should I be paying to have this done? and I should I buy the 2.5" flanges for this or will the muffler shop already have access to these or another way to do it?
#4
Junior Member
Thread Starter
Join Date: Mar 2006
Location: irvine, ca, US
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much should I pay? (92 si hatch)
"you'll prob. be looking at about $500 if it's a good shop, and they should have everything on hand."
Oh yeah? Let me get right on that, thanx for the help!
#5
Junior Member
Join Date: Dec 2005
Location: clovis, ca
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
why not go for a complete catback and get a high flow cat or test pipe. will sound alot better unless its just for track use then get the custom. ( just my opinion)
#6
Re: How much should I pay? (92 si hatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ahemming06 »</TD></TR><TR><TD CLASS="quote">
"you'll prob. be looking at about $500 if it's a good shop, and they should have everything on hand."
Oh yeah? Let me get right on that, thanx for the help!
</TD></TR></TABLE>
??? That **** better be mandrel bent and made out of titanium. I paid in the $200 range for mine
"you'll prob. be looking at about $500 if it's a good shop, and they should have everything on hand."
Oh yeah? Let me get right on that, thanx for the help!
</TD></TR></TABLE>
??? That **** better be mandrel bent and made out of titanium. I paid in the $200 range for mine
Thread
Thread Starter
Forum
Replies
Last Post