usdmEHboy

So I'm about to swap the wiring from my 95 hatch with d16z6 onto the jdm b16a and I have a few questions

The two turqoise ones go together right? If so, what about the pink one...i don't see the plug for that.

(this is my first swap so be nice)




Also where is the knock sensor that i'm supose to wire?

And lastly...

NJcoupe

The two teals match up; they are for the IACV.

The pink one; one line runs to the canister. the other one comes off the throttle body to the canister. and the pipe; a line goes from there to the canister.

usdmEHboy

alright...i understand all that except for that plug circled in pink...where does that plug go onto the b16

EDIT: thanks for the help btw...i appreciate it

StreetRacinThug

Loving the clean B16

NJcoupe

your going to need to take the evap purge solenoid off your motor; (the pink thing) and swap it into your b16.

usdmEHboy

where on the b16? since its not in the same spot...sorry for all the questions...i am a complete noob at the whole engine swap thing...

usdmEHboy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StreetRacinThug &raquo;</TD></TR><TR><TD CLASS="quote">Loving the clean B16</TD></TR></TABLE>

thanks man....hmotorsonline is an awesome business

NJcoupe

just let it chill/dangle; or drill and tap the hang over on the manifold to accept a screw to bolt it onto.

Its not there on JDM motors because its there for US emissions.

usdmEHboy

oo cool..so i will probably be throwing a code for it..o well...any idea where the knock sensor is...Last question i promise..thanks so much for helping me

NJcoupe

if that is not connected; it will not throw a CEL.