Head Gasket blew now i have a serious problem.......
09-30-2007, 06:33 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Head Gasket blew now i have a serious problem.......
Early last week my head gasket blew on my B18C. I dropped the car off by my mechanic he did the necessary.
After taking it off he took it to the machine shop to get the head milled.
He got it back, he also peeled a layer off the OEM headgasket and put it back up.
After putting it back up and started the car he, said he hear a sound similar to a hose blowing, then oil started to spray from between the Head and the block on the side right below the distributor.
Any ideas why it would do this.... he says the machine shop has a good rep and all the heads it does come back nice and level.
After taking it off he took it to the machine shop to get the head milled.
He got it back, he also peeled a layer off the OEM headgasket and put it back up.
After putting it back up and started the car he, said he hear a sound similar to a hose blowing, then oil started to spray from between the Head and the block on the side right below the distributor.
Any ideas why it would do this.... he says the machine shop has a good rep and all the heads it does come back nice and level.
09-30-2007, 07:08 PM
#2
Honda-Tech Member
iTrader: (2)
Join Date: May 2005
Location: Daly City/ San Mateo, CA, US
Posts: 2,934
Likes: 0
Received 1 Like
on
1 Post
Re: Head Gasket blew now i have a serious problem....... (eg6madness)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg6madness »</TD></TR><TR><TD CLASS="quote">Early last week my head gasket blew on my B18C. I dropped the car off by my mechanic he did the necessary.
After taking it off he took it to the machine shop to get the head milled.
He got it back, he also peeled a layer off the OEM headgasket and put it back up.
After putting it back up and started the car he, said he hear a sound similar to a hose blowing, then oil started to spray from between the Head and the block on the side right below the distributor.
Any ideas why it would do this.... he says the machine shop has a good rep and all the heads it does come back nice and level.
</TD></TR></TABLE>
doesnt sound much like your mechanic torqued the head down properly...
After taking it off he took it to the machine shop to get the head milled.
He got it back, he also peeled a layer off the OEM headgasket and put it back up.
After putting it back up and started the car he, said he hear a sound similar to a hose blowing, then oil started to spray from between the Head and the block on the side right below the distributor.
Any ideas why it would do this.... he says the machine shop has a good rep and all the heads it does come back nice and level.
</TD></TR></TABLE>
doesnt sound much like your mechanic torqued the head down properly...
Thread
Thread Starter
Forum
Replies
Last Post
btech
Acura Integra
9
08-19-2006 01:15 PM
Dartanian
Forced Induction
5
06-13-2006 10:40 PM
