gas leak in my EG cant figure out why?/?
#1
Thread Starter
Join Date: Dec 2005
Location: milford, pa, USA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
gas leak in my EG cant figure out why?/?
okay i finished my swap connected the bronzish color hose on the drivers side by the fuel rail to the black canister...cause it looked like the hose was the same size and went there....now i have a ****** gas leak a bad one...can someone tell me if i did this wrong or wtf happened....CAr runs mint no problem...just gas leak haha not bad for a first swap ehh?...and the motors a 98 d16y8 and the cars a 95 cx let me know asap before i go insane
#4
Thread Starter
Join Date: Dec 2005
Location: milford, pa, USA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: gas leak in my EG cant figure out why?/? (shiftgear8000)
nah my cameras being a piece of ****...but its coming from under neath the car...and it wasnt leaking before i instaled this hose
#5
Thread Starter
Join Date: Dec 2005
Location: milford, pa, USA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: gas leak in my EG cant figure out why?/? (d16y8delsol)
anyone...its connected to the FPR = fuel press reg. and runs to the drivers side motors a 98 y8....i have it connected to teh black canister on the firewall which i have come to the conclusion its wrong can anyone tell me where it goes?
#6
Honda-Tech Member
Join Date: Feb 2004
Location: York, SC
Posts: 1,033
Likes: 0
Received 0 Likes
on
0 Posts
Re: gas leak in my EG cant figure out why?/? (d16y8delsol)
the FPR is connected to a hard fuel line on the drivers side of the firewall.....the black canister you probably have it connected to is an emissions charcoal canister which is on the passenger side of the firewall
Trending Topics
#11
Thread Starter
Join Date: Dec 2005
Location: milford, pa, USA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: (d16y8delsol)
i found out that i think its the fuel return line, and i cant ****** figure this **** out...it comes out on the drivers side (the bronze line) and i have a hose connected to it but dont know where it goes to
#13
Thread Starter
Join Date: Dec 2005
Location: milford, pa, USA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: (shiftgear8000)
hey dude thanks for the help...i figured it out and i fixed that problem...the cars running awesome...swaps done lol cars gone today lol
#15
Thread Starter
Join Date: Dec 2005
Location: milford, pa, USA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: (shiftgear8000)
i had it connected to the evap canister...to the nipple with the pipe that goes out the bottom so it was running and sending the gas to the ground lol....****** hondas LOL thank got im gettin rid of it today
Thread
Thread Starter
Forum
Replies
Last Post