Full Size radiator in EG
#4
Re: Full Size radiator in EG (RCautoworks)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RCautoworks »</TD></TR><TR><TD CLASS="quote">Fabricate some up </TD></TR></TABLE>
make some rather than go look for some, by the time you fiind some you could have made 30 sets
make some rather than go look for some, by the time you fiind some you could have made 30 sets
#6
Re: Full Size radiator in EG (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">What kind of car? Swap?
Most swapped guys just use stock brackets and a del sol radiator.</TD></TR></TABLE> yea where do they get the stock brackets from? not sure why you asked what car and what motor, but it's an EG with b-series. I'm talking about the lower radiator brackets.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Team RS2 »</TD></TR><TR><TD CLASS="quote">
make some rather than go look for some, by the time you fiind some you could have made 30 sets </TD></TR></TABLE>
i'm not too creative, plus i don't want anything ghetto, give me an example to spark an idea.
Most swapped guys just use stock brackets and a del sol radiator.</TD></TR></TABLE> yea where do they get the stock brackets from? not sure why you asked what car and what motor, but it's an EG with b-series. I'm talking about the lower radiator brackets.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Team RS2 »</TD></TR><TR><TD CLASS="quote">
make some rather than go look for some, by the time you fiind some you could have made 30 sets </TD></TR></TABLE>
i'm not too creative, plus i don't want anything ghetto, give me an example to spark an idea.
Trending Topics
#8
Re: (Eran)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran »</TD></TR><TR><TD CLASS="quote">Why don't you just go to a salvage yard, get the two stays off an integra, get a drill ... and make them work on your car?</TD></TR></TABLE> i don't want anything ghetto. everytime i drill those spot welds out, they never come out without prying, when i pry it, it starts to bend and get all funky.
#9
Re: Full Size radiator in EG (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">Del sol brackets can be had at a dealer for $42 I think.
Or try http://www.hondaautomotiveparts.com
</TD></TR></TABLE> i can't find it
Or try http://www.hondaautomotiveparts.com
</TD></TR></TABLE> i can't find it
Thread
Thread Starter
Forum
Replies
Last Post
punkybrewster
Acura Integra
10
04-19-2006 03:37 PM
Ecko93civic
Honda Civic / Del Sol (1992 - 2000)
11
02-27-2005 09:40 AM