vtrp2008

I got a 94 eg coupe got the foggies headligts n corners as a set from ebay...got the foggies hooked up and they were working perfect...once i bolted the bumper in place they stopped working and just keep popping fuses...i take the bumper off thet work fine bolted the bumper on again and same problem...the grounds are good just pops fuses once bumpers in place...anyone got any ideas what making this happen?? ..
I appreciate any imput thanks HT

grumblemarc

iTrader: (4)

Short. You're pinching a wire most likely.

vtrp2008

All the wires are covered nothings exposed its all neat so it must be a pinch wire huh?..been sitiing here wondering wtf could cause that cuz ita only when bumper is in place and bolted on that it fuckes up

grumblemarc

iTrader: (4)

No other explanation. You're shorting a power lead out on something if you're popping fuses.

vtrp2008

Awsome..im not to good with wiring and all that so that helps...thank u for the help much appriciated..ima have to wait til tomarrow to solve it cuz its snowing over here lol but now i kno the problem

deschlong

iTrader: (8)

FYI YOU MUST NOT put a fuse in of a higher rating ... that leads to fires and wayyyy more problems.