hondacivichatch

I bought a floor harness from a local salvage yard and it was cut so I just went ahead and connected all the wires to the matching colors. Today I found out when I put on my signal my low gas light comes on.....lol So I need a way to re-wire the harness. I don't have a problem with the colors that there are only one of (obviously) but just the colors that have more then one I was wondering where I could find a explanation of which color is which, and were it should go? If no one can give me that, could they please tell me for ex. the wiring for the rear tailights should connect to.... and another ex. the fuel pump wiring should go to the wiring clip on the.... Besides all that I can do the rest with a multi-meter. Thanks!

Black w/blue stripe
Brown w/white stripe
Baby blue
Black w/red stripe
Blue
-Blue w/yellow stripe x 2
Blue w/black stripe
-Black x 2 (Ground?)
Gray
-Gray w/white stripe x 2
Green w/red stripe
-Green w/yellow stripe x 3
-Green w/black stripe x 2
Red w/yellow stripe
Red w/black stripe
Teal w/red stripe
Teal (Thick)
Teal
White w/red stripe
Yellow w/green stripe
Yellow w/blue stripe
Yellow w/black stripe