radicaled434

ok this is weird, everything is connected properly and when i step on the gas pedal the engine jerks and bogs to death

now when i unplug the TPS & MAP then switch them my cars runs perfectly fine BUT i now have 2 codes, Code 3 (MAP) and Code 7 (TPS), also when i leave both unplugged the car works but drives like dog sh*t

Can anyone shed some light on my situation?

Yo Pintura Trenes

Then try replacing you map then tps first and go from there

Silvertune

The IAT and IAC have identical pigtails as well, make sure the color of the connectors match (IAT is white and white)

beecee18

It seems maybe as if the tps and map have been switched, because it would take a destroyed sensor or an open circuit to make those codes go off, That is, if it is OBD1.

I would start at just swapping the two,
If your one of those guys thats already been over that and double checked the $#!T out of.

I am sorry lol.

radicaled434

the IAT and IAC are fine its the MAP and TPS that are bugged

radicaled434

Thx for the input, ive checked with the hayes manual and all my wires are correct and plugged into the proper spots

radicaled434

this seems to be my only option at this point, ill hunt down some cheap sensors and report my findings