ek front bumper made for eg, what's the site to buy?
06-05-2005, 11:50 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: bay area and davis, ca, usa
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
ek front bumper made for eg, what's the site to buy?
i remembered reading a thread about ek front bumpers being made for eg's, but i just couldnt find it again.
does anyone know the site(s) where i can get them?
also, i've never seen one on an eg before, so if anyone has them, please post pics.
thanks.
does anyone know the site(s) where i can get them?
also, i've never seen one on an eg before, so if anyone has them, please post pics.
thanks.
06-06-2005, 02:59 AM
#3
Honda-Tech Member
Join Date: May 2005
Location: Oceanside, CA, USA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Just get a whole front clip from an EK like a 2000 Si or something. Fenders, hood, bumper and headlights. It'll bolt on n wire up fine. USDM Integra type R front clip on an EG looks kewl too. Or JDM type R Integra. More money tho.
06-06-2005, 04:03 AM
#4
Join Date: Jun 2002
Location: MN or Cali, depends which office Im at
Posts: 1,823
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hybridmyk)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridmyk »</TD></TR><TR><TD CLASS="quote">Just get a whole front clip from an EK like a 2000 Si or something. Fenders, hood, bumper and headlights. It'll bolt on n wire up fine. USDM Integra type R front clip on an EG looks kewl too. Or JDM type R Integra. More money tho.</TD></TR></TABLE>
ek front clip does not bolt onto eg's. dont waste ur time with it. eg's are the best looking civic's honda has made and u wanna ruin that? keep the clean look of eg and put that money into ur motor.
and for the new guy i quoted...please do some research and know what ur talking about before giving other people advice. where did u hear that ek front clip bolts up to eg's?
ek front clip does not bolt onto eg's. dont waste ur time with it. eg's are the best looking civic's honda has made and u wanna ruin that? keep the clean look of eg and put that money into ur motor.
and for the new guy i quoted...please do some research and know what ur talking about before giving other people advice. where did u hear that ek front clip bolts up to eg's?
06-06-2005, 04:33 AM
#5
Honda-Tech Member
Join Date: Jan 2004
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
Re: ek front bumper made for eg, what's the site to buy? (egg_baLLa)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egg_baLLa »</TD></TR><TR><TD CLASS="quote">i remembered reading a thread about ek front bumpers being made for eg's, but i just couldnt find it again.
does anyone know the site(s) where i can get them?
also, i've never seen one on an eg before, so if anyone has them, please post pics.
thanks.</TD></TR></TABLE>
Team emotion has a Eh hatchback with the front. Don't know who owns the car though.
does anyone know the site(s) where i can get them?
also, i've never seen one on an eg before, so if anyone has them, please post pics.
thanks.</TD></TR></TABLE>
Team emotion has a Eh hatchback with the front. Don't know who owns the car though.
06-06-2005, 12:10 PM
#6
Honda-Tech Member
Join Date: Jul 2002
Location: THE COUVE, Wa, Us
Posts: 3,106
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hybridmyk)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridmyk »</TD></TR><TR><TD CLASS="quote">Just get a whole front clip from an EK like a 2000 Si or something. Fenders, hood, bumper and headlights. It'll bolt on n wire up fine. USDM Integra type R front clip on an EG looks kewl too. Or JDM type R Integra. More money tho.</TD></TR></TABLE>
if you dont know what the **** you are talking about dont give false info. The guys just looking for the front bumper not the whole front end.
if you dont know what the **** you are talking about dont give false info. The guys just looking for the front bumper not the whole front end.
06-06-2005, 12:14 PM
#7
Honda-Tech Member
Join Date: Nov 2004
Location: dirty, jersey, USA
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
perhaps something like this:
http://www.importfan.com/index...=1489
i might rock it if it wasnt cf and was urethane
i like the ek foglights much more than eg ones
http://www.importfan.com/index...=1489
i might rock it if it wasnt cf and was urethane
i like the ek foglights much more than eg ones
Trending Topics
06-06-2005, 04:53 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: bay area and davis, ca, usa
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
Re: (J-Star)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J-Star »</TD></TR><TR><TD CLASS="quote">perhaps something like this:
http://www.importfan.com/index...=1489
i might rock it if it wasnt cf and was urethane
i like the ek foglights much more than eg ones</TD></TR></TABLE>
ah dam. yeah i'd rather have it urethane also. but the bumper looks good though.
however, i did find this on the same site:
http://www.importfan.com/index...=1522
it has no pic so im not sure if its urethane or cf.
http://www.importfan.com/index...=1489
i might rock it if it wasnt cf and was urethane
i like the ek foglights much more than eg ones</TD></TR></TABLE>
ah dam. yeah i'd rather have it urethane also. but the bumper looks good though.
however, i did find this on the same site:
http://www.importfan.com/index...=1522
it has no pic so im not sure if its urethane or cf.
06-06-2005, 06:32 PM
#10
Honda-Tech Member
Join Date: May 2005
Location: Oceanside, CA, USA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
maybe i am wrong in what i put earlier n i feel like a dumbass if i am, but i have seen it done on a cople of frenz cars. i dunno if they had to customize ne thing, but i have seen the the EK front clip, hood, bumper, fenders n lights on an EG. Another fren put a 1 piece front end for an EK on his EG and it looked kewl too.
Again, if I said something a little off, sorrie. I'll try n find the pix tho cuz it has been done.
Again, if I said something a little off, sorrie. I'll try n find the pix tho cuz it has been done.
06-06-2005, 09:02 PM
#12
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: bay area and davis, ca, usa
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hybridmyk)
yeah i should put the money into the motor, but i promised myself that after i get my swap i should work on exterior and interior. i think my gsr swap is good enough for the meantime.
06-06-2005, 09:13 PM
#13
Honda-Tech Member
Join Date: Jul 2004
Location: Osceola, IN, USA
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Re: (98B00STED)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98B00STED »</TD></TR><TR><TD CLASS="quote">.... eg's are the best looking civic's honda has made and u wanna ruin that? ....</TD></TR></TABLE>
I disagree.. i think the 99-00 Si's are the best looking civics honda has made.
I disagree.. i think the 99-00 Si's are the best looking civics honda has made.
06-06-2005, 09:19 PM
#14
Junior Member
Join Date: Feb 2005
Location: Keswick, Ontario, Canada
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JDMKid71)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMKid71 »</TD></TR><TR><TD CLASS="quote">
I disagree.. i think the 99-00 Si's are the best looking civics honda has made.</TD></TR></TABLE>
92-95 all the way 
I disagree.. i think the 99-00 Si's are the best looking civics honda has made.</TD></TR></TABLE>
92-95 all the way
06-06-2005, 09:39 PM
#15
Honda-Tech Member
Join Date: Jul 2004
Location: Osceola, IN, USA
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Re: (FarOutCoupe)
i must just be thinking of mine sence only half of my car has a clear coat and the rest doesnt and the rear wheel wells are rusting out... and my paint is supper supper dull... yep prob just thinking of mine lmao
06-07-2005, 01:43 AM
#18
Honda-Tech Member
Join Date: Mar 2004
Location: NOR CAL
Posts: 5,900
Likes: 0
Received 0 Likes
on
0 Posts
06-07-2005, 02:09 AM
#20
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: bay area and davis, ca, usa
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
Re: (AzntaggeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Advan06 »</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=886368
https://honda-tech.com/zerothread?id=710363
</TD></TR></TABLE>
ahh good stuff advan06. these were wat i was looking for.
and thanks for the pic azntagger. looks sweet.
however whitecrows website doesnt work for me? can someone check?
https://honda-tech.com/zerothread?id=710363
</TD></TR></TABLE>
ahh good stuff advan06. these were wat i was looking for.
and thanks for the pic azntagger. looks sweet.
however whitecrows website doesnt work for me? can someone check?
06-07-2005, 02:25 AM
#21
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: bay area and davis, ca, usa
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
Re: (egg_baLLa)
hey wat lip is this? i got this pic from some other thread:
and would it fit the ek-made-for-eg bumper? i think that looks clean.
and would it fit the ek-made-for-eg bumper? i think that looks clean.
06-07-2005, 06:37 AM
#23
Imperious: Mod of Valor
Join Date: Oct 2003
Location: Seattle, WA
Posts: 12,393
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Soccerking3000)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Soccerking3000 »</TD></TR><TR><TD CLASS="quote">that looks like the JDMsh!t.com mugen version 2 lip, if not just the normal mugen lip...</TD></TR></TABLE>
Yup, I have that lip for my EG. I like it.
Yup, I have that lip for my EG. I like it.
06-07-2005, 03:51 PM
#25
Join Date: Jun 2005
Location: Cerritos, CA, USA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: (98B00STED)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98B00STED »</TD></TR><TR><TD CLASS="quote">ek front clip does not bolt onto eg's. dont waste ur time with it. eg's are the best looking civic's honda has made and u wanna ruin that? keep the clean look of eg and put that money into ur motor. </TD></TR></TABLE>
There it is.
There it is.