EK fogs on EG
07-20-2007, 02:37 PM
#2
Honda-Tech Member
Join Date: Feb 2007
Location: Stay away from my car,, CA, USA
Posts: 2,638
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK fogs on EG (hip_hop_s0ulchild)
hey, wow. At least you opened with a picture, so nobody can say you haven't searched.
I say you just dive into it, and make a writeup, because even though many people say "search" they don't know where to find a decent writeup.
Do a little research on how the EK fogs hook into the back of the bumper, and find a way to fabricate it. It looks to me like a straightforward project that one with some common sense could figure out, and do a good writeup on.
Those spots on the foglight look like rivets to me, which I think you should roll with as a start: Looks gritty.
I say you just dive into it, and make a writeup, because even though many people say "search" they don't know where to find a decent writeup.
Do a little research on how the EK fogs hook into the back of the bumper, and find a way to fabricate it. It looks to me like a straightforward project that one with some common sense could figure out, and do a good writeup on.
Those spots on the foglight look like rivets to me, which I think you should roll with as a start: Looks gritty.
07-20-2007, 04:39 PM
#5
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2007
Location: Snohomish County, WA
Posts: 3,683
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK fogs on EG (racereadyk24)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racereadyk24 »</TD></TR><TR><TD CLASS="quote">REGARDLESS THAT **** LOOKS **** </TD></TR></TABLE>
What an intelligent observation
What an intelligent observation
07-20-2007, 04:56 PM
#7
Honda-Tech Member
Join Date: Feb 2007
Location: Stay away from my car,, CA, USA
Posts: 2,638
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK fogs on EG (racereadyk24)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racereadyk24 »</TD></TR><TR><TD CLASS="quote">REGARDLESS THAT **** LOOKS **** </TD></TR></TABLE>
This isn't a "what do you guys think of this setup?" thread, so I'm pretty sure he doesn't care what you think. Now be quiet.
This isn't a "what do you guys think of this setup?" thread, so I'm pretty sure he doesn't care what you think. Now be quiet.
Trending Topics
07-20-2007, 06:18 PM
#9
Honda-Tech Member
Join Date: Feb 2007
Location: Stay away from my car,, CA, USA
Posts: 2,638
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EK9Tune)
Well, unless you do a really good job at searching for the DIY, if there is one that's any good, you'll end up looking at threads asking where you can find the writeup, which is all I cared to do.
07-20-2007, 06:20 PM
#10
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: (EK9Tune)
I agree, it looks really good.
IMO, get a dremel and start cutting. Use rivets like the guy in the picture did. Just take time and make templates for everything and test fit.
IMO, get a dremel and start cutting. Use rivets like the guy in the picture did. Just take time and make templates for everything and test fit.
07-20-2007, 06:29 PM
#11
Honda-Tech Member
Join Date: Feb 2007
Location: Stay away from my car,, CA, USA
Posts: 2,638
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ek forever guy)
Yeah, and make damn sure you make those things symmetrical!
I've seen this done wrong before, and it really is a fine line, so take special care in aligning them, and spacing them well from the center grille. I look forward to seeing how you execute this if you take your time.
I've seen this done wrong before, and it really is a fine line, so take special care in aligning them, and spacing them well from the center grille. I look forward to seeing how you execute this if you take your time.
Thread
Thread Starter
Forum
Replies
Last Post