Del Sol S - Build Thread
#1
Honda-Tech Member
Thread Starter
Del Sol S - Build Thread
Hey guys, im new to the forum, and im unsure if im in the correct place for this post, but I digress. Now on to the build.
I bought the car shortly before I joined the military and it had a bone stock d15b7 with a shortram intake, under glow, steelies, and rougly 325k on the odometer.
Since then I decided I would blow all of my money on building a d16z6 because everyone in my hometown was running a super low compression, turbo b series.
specs on the motor from top to bottom.
-level 3 NA bisimoto camshaft
-bisimoto valvesprings, and retainers
-ferrea valves cut at 42 degrees
-cp pistons (10.5:1)
-Eagle rods
-aem fuel rail and fpr
-skunk 2 cat back
-tuned on hondata s300
Im sitting on some 14' oz meshes that look like ls meshes, and im lowered around 2.5 inches with 2.3 degrees camber all the way around.
pics will be up soon.
My future plans are to boost it and see what happens, im looking at a dna short ram, rc 550's, gt2860rs, and an aem meth kit, but im still up in the air on all of that if I can figure out what kind of spool lag I will get, and I know im leaving a lot of stuff out, thatll all be updated once I think about it.
I will have pics up soon,
Thanks for checking out my thread, and let me know if you want any other information on my build. Its not much, but its mine. :D
I bought the car shortly before I joined the military and it had a bone stock d15b7 with a shortram intake, under glow, steelies, and rougly 325k on the odometer.
Since then I decided I would blow all of my money on building a d16z6 because everyone in my hometown was running a super low compression, turbo b series.
specs on the motor from top to bottom.
-level 3 NA bisimoto camshaft
-bisimoto valvesprings, and retainers
-ferrea valves cut at 42 degrees
-cp pistons (10.5:1)
-Eagle rods
-aem fuel rail and fpr
-skunk 2 cat back
-tuned on hondata s300
Im sitting on some 14' oz meshes that look like ls meshes, and im lowered around 2.5 inches with 2.3 degrees camber all the way around.
pics will be up soon.
My future plans are to boost it and see what happens, im looking at a dna short ram, rc 550's, gt2860rs, and an aem meth kit, but im still up in the air on all of that if I can figure out what kind of spool lag I will get, and I know im leaving a lot of stuff out, thatll all be updated once I think about it.
I will have pics up soon,
Thanks for checking out my thread, and let me know if you want any other information on my build. Its not much, but its mine. :D
#3
Honda-Tech Member
Thread Starter
Re: Del Sol S - Build Thread
#5
Honda-Tech Member
Thread Starter
Re: Del Sol S - Build Thread
Long story short, Im going through some legal stuff, and almost deployed so my car was thrown on the backburner, and im still trying to decide what I want to do as far as sizing and horsepower goals. It should start coming together this spring.
#6
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: Del Sol S - Build Thread
OMG could you keep your personal business out of the thread? When you start airing out your dirty laundry it never ends up well. This is a tech forum, not Dear Abby.
As for what I can see, there is absolutely no build going on here.
As for what I can see, there is absolutely no build going on here.
#7
Loves Tossing Salad
Join Date: Mar 2014
Location: They all look like little ants
Posts: 1,067
Likes: 0
Received 14 Likes
on
10 Posts
Re: Del Sol S - Build Thread
Come on back when you're ready for the build. Answers to your questions are located in the FAQ sticky grayed out near the top of the tech home page
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
Solman411
Honda Civic / Del Sol (1992 - 2000)
2
12-20-2011 07:43 PM
Nucking Futz
Honda Civic / Del Sol (1992 - 2000)
8
08-07-2011 05:08 AM