could i have blown my headgasket w/ turbo? help!
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: Los Angeles CA, Houston TX
Posts: 4,605
Likes: 0
Received 0 Likes
on
0 Posts
could i have blown my headgasket w/ turbo? help!
ive search but im getting different answers,
ok heres the deal its stock b16a w/ garrett turbo @7 psi, after about a week of boosting my car started blowing white smoke off the muffler, one thing i notice though after about 30 minutes of driving the car starts to bog and hesitates, i havent been driving it at all for about a week, when i checked my oil cap last monday, i saw a milky brown"peanut buttery stuff" build up under the cap. i know im loosing coolant. i checked my dip stick and it looked normal to me. also my car seems to idle ok. now heres my questions.
a. do you guys think the piston rings are gone.
b. could it be a cracked sleeve.
c. will a compression check determine this
i need your input on this one. thanks for any info.
please no flaming im not a newbie.
ok heres the deal its stock b16a w/ garrett turbo @7 psi, after about a week of boosting my car started blowing white smoke off the muffler, one thing i notice though after about 30 minutes of driving the car starts to bog and hesitates, i havent been driving it at all for about a week, when i checked my oil cap last monday, i saw a milky brown"peanut buttery stuff" build up under the cap. i know im loosing coolant. i checked my dip stick and it looked normal to me. also my car seems to idle ok. now heres my questions.
a. do you guys think the piston rings are gone.
b. could it be a cracked sleeve.
c. will a compression check determine this
i need your input on this one. thanks for any info.
please no flaming im not a newbie.
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: Los Angeles CA, Houston TX
Posts: 4,605
Likes: 0
Received 0 Likes
on
0 Posts
Re: could i have blown my headgasket w/ turbo? help! (zzZZzzleeperCX)
its a 00si head and an older jdm b16a block now i dont know if the previous owner re used the old gasket. any other info?
Thread
Thread Starter
Forum
Replies
Last Post
oranginal
Forced Induction
45
04-28-2012 05:35 PM
b20vtec crx
Forced Induction
9
07-18-2005 06:42 PM