converting manual doors to power
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: va
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
converting manual doors to power
ok so im wanting to get new doors for the civic since doing body work to them is too much hassle. im wondering if i could get power locks and windows and hook them up without any probs. im fairly sure i have fuse slots for the power options. would there be any extra wiring involved?
#6
Honda-Tech Member
Re: converting manual doors to power
well then your best bet would be get the regulators,door panels, switchs,door harness,floor harness, lock motors and a few nick naks i might forgot.
same yr as your car. maybe from an lx or ex would be your choice.
same yr as your car. maybe from an lx or ex would be your choice.
#7
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: va
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: converting manual doors to power
could i go get the four doors from a junkyard that have power options? someone said i could take the wiring from the donar from the fusebox to the doors and put them on my car while plugging them into my fusebox and it would work. i do have fuse slots for the power options so would that work?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
SiRCiviC94
Honda Civic / Del Sol (1992 - 2000)
2
11-12-2012 10:32 PM
4playEkay
Honda Civic / Del Sol (1992 - 2000)
5
03-31-2005 10:48 PM