Chasebays CM1 Harness install in a EG. {Q's}
#52
Honda-Tech Member
Join Date: Aug 2009
Location: Union City, NJ
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chasebays CM1 Harness install in a EG. {Q's}
you werent kidding... Got my CM2 Harness and the wiring doesn add up!!!!!!!! altenator wire wont reach WTF!!!!!!!!! To top it off called customer support and what a surprise, no one to answer -_- this sucks ***, to think i was so excited
#54
Honda-Tech Member
Join Date: Aug 2009
Location: Union City, NJ
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chasebays CM1 Harness install in a EG. {Q's}
Yeah my harness looks like a rhd b series harness, it sucks but if the wont do anything ill just extend some wires and get over it. Sucks to go through the disappointment though
#57
Honda-Tech Member
Join Date: Aug 2009
Location: Union City, NJ
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chasebays CM1 Harness install in a EG. {Q's}
The BROWN (sometimes looks gray) wire zip-tied near the Chassis Plug is your Service Check Signal [SCS], if you get a check engine
light you will simply ground this wire to chassis and the code will flash on your gauge cluster. This bypasses the small 2-way
connector in the passenger foot-well.
• GREEN/YELLOW to A7 (OEM color: Green/Yellow, or Green/Blue)
• ORANGE/BLUE to A13 (OEM color: Green/Orange)
light you will simply ground this wire to chassis and the code will flash on your gauge cluster. This bypasses the small 2-way
connector in the passenger foot-well.
• GREEN/YELLOW to A7 (OEM color: Green/Yellow, or Green/Blue)
• ORANGE/BLUE to A13 (OEM color: Green/Orange)
#58
Honda-Tech Member
Join Date: Aug 2009
Location: Union City, NJ
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
#59
Honda-Tech Member
Join Date: Mar 2006
Location: Colorado
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chasebays CM1 Harness install in a EG. {Q's}
All the horror stories left and right and you people are still giving this guy money?
**** that. Rywire all the way or better yet MAKE YOUR OWN.
**** that. Rywire all the way or better yet MAKE YOUR OWN.
#60
Honda-Tech Member
Join Date: Aug 2009
Location: Union City, NJ
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chasebays CM1 Harness install in a EG. {Q's}
rywire sent me wrong wires last year for a k series -_- talked to them and had a run around just to get the right jumper harness. But non the less, had i known ahead of time of this mess i would have gone another route
#61
Re: Chasebays CM1 Harness install in a EG. {Q's}
i have the same chasebays harness obd1 b series into a eg hatch. where exactly do u connect those 3 extra wires i can't find where can some post a picture or something to help me out chase isn't helping at all
#62
Honda-Tech Member
Join Date: May 2008
Location: TrussVegas , AL
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chasebays CM1 Harness install in a EG. {Q's}
I got a bad ls1 harness from him last yr. a lot of issues with it... and his shop is local to us so it really surprised me when there was so many mistakes in incorrect pin locations.
Thread
Thread Starter
Forum
Replies
Last Post
wfocrx
Honda CRX / EF Civic (1988 - 1991)
0
04-30-2015 05:56 PM
stehigs321
Honda Civic / Del Sol (1992 - 2000)
2
01-16-2005 03:40 PM