lilo_goki

this is weird, i knoe that brakes doesn't have anything to do with the engine, but after i did my ls swap. when i start the car, drive it and press on the brake, brake would not work, it would just be dead, i have to double pump it for it to work. then later on while driving, it'll start to work. i have to do that everything i restart the car. weird, anyone ever had the same problem?

23-10

Is the brake booster vacuum hose connected properly?

lilo_goki

yea i'm pretty sure. i don't think i even touch that when i did the swap. i'll go check.

jdmcivicracer89

check your clutch slave cylinder...

lilo_goki

clutch slave cylinder. what can be wrong with it. why does the clutch slave cylinder affects the brakes.

benzo_tek

clutch has nothing to do with the brakes. Check the booster for sure and post back. Make sure you dont have a slight leak in a line also.

awdgsx96

Make sure you didn't damage the vacuum line to the brake booster. And make sure it is securely connected to the IM

lilo_goki

i'll check the brake booster and the vacuum line to the brake booster tomorrow. thanks.

lilo_goki

k i check the brake booster vaccum line and it's on tight. no leak. so what's wrong. i might just rebleed the brake.