B18c1 help in eg/Running problems.
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Thunder Bay , Ontario
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
B18c1 help in eg/Running problems.
93 civic cx
installed a obd2 gsr motor/harness/ecu p72
motor runs and starts but has problems:
1. Jolts when i shift
2. Runs Rich
3. and idles funny
-Different CEL codes for the past month - 5 last week to 1 this week being code 22 - vtec not hooked up.
-Car is sitting in my driveway and not being driven.
-installed new map sensor/ have new throttle sensor but want to test old one first.
-Made sure map sensor/throttle sensor are not in wrong places. Switched both around and tried starting - same thing happening.
-Have the integra secondaryo2 sensor - not installed yet.
-Everything ran fine when installed in the integra before swap - sat for a month then installed.
Any information on this problem would be appreciated, need it back on the road asap
installed a obd2 gsr motor/harness/ecu p72
motor runs and starts but has problems:
1. Jolts when i shift
2. Runs Rich
3. and idles funny
-Different CEL codes for the past month - 5 last week to 1 this week being code 22 - vtec not hooked up.
-Car is sitting in my driveway and not being driven.
-installed new map sensor/ have new throttle sensor but want to test old one first.
-Made sure map sensor/throttle sensor are not in wrong places. Switched both around and tried starting - same thing happening.
-Have the integra secondaryo2 sensor - not installed yet.
-Everything ran fine when installed in the integra before swap - sat for a month then installed.
Any information on this problem would be appreciated, need it back on the road asap
Thread
Thread Starter
Forum
Replies
Last Post
xtripped
Honda Civic / Del Sol (1992 - 2000)
13
06-10-2004 10:49 AM