B18C1 in eg cx evap problem
05-30-2007, 07:05 AM
#1
Thread Starter
Join Date: May 2007
Location: Ottawa, ON, Canada
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
B18C1 in eg cx evap problem
I've recently swapped in a obd-1 b18c1 with obd-1 p72 ecu into my 1992 eg cx. I've added a wire for knock sensor to pin D3, then wired the evap purge solenoid (Yellow/Black wire to battery + and red wire to pin A20) So now with the evap not plugged in the car runs perfect but when i plug it in it runs like crap almost as if it was running on 3 cylinders. What could this be? I need to get an emissions test and need this for it.
Thanks
Matt
Thanks
Matt
Thread
Thread Starter
Forum
Replies
Last Post
Prevail
Honda Civic / Del Sol (1992 - 2000)
2
02-24-2003 05:27 PM
