b-series build up whp help
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: Loomis.
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
b-series setup
what kind of whp can i expect with this setup?
top:
b16a2 head pnp
xs stage 2 cams, valve springs, retainer
64mm tb bored
itr im port match and runners
jdm itr 4-1 header 2.5 all the way back
bottom:
b18c1 81.5mm
jdm itr or ctr pistons 81.5mm os and connect rods
gsr balance polish crank
top:
b16a2 head pnp
xs stage 2 cams, valve springs, retainer
64mm tb bored
itr im port match and runners
jdm itr 4-1 header 2.5 all the way back
bottom:
b18c1 81.5mm
jdm itr or ctr pistons 81.5mm os and connect rods
gsr balance polish crank
#2
Honda-Tech Member
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes
on
2 Posts
Re: b-series setup (yogimel)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yogimel »</TD></TR><TR><TD CLASS="quote">what kind of whp can i expect with this setup?
top:
b16a2 head pnp
xs stage 2 cams, valve springs, retainer
64mm tb bored
itr im port match and runners
jdm itr 4-1 header 2.5 all the way back
bottom:
b18c1 81.5mm
jdm itr or ctr pistons 81.5mm os and connect rods
gsr balance polish crank
</TD></TR></TABLE>
Nobody can tell you that for sure, it'll be hard to even get an estimate on that.
Build it and find out, let us know .
If it's not enough - BOOST.
Here, lemme help you out:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton »</TD></TR><TR><TD CLASS="quote">Things that won't be tolerated:
> Excessive flaming
> Posts with no techincal content
> eBay Ads
> Classifieds ads
> Picture threads
> "I got scammed by..." threads
> Bench racing</TD></TR></TABLE>
top:
b16a2 head pnp
xs stage 2 cams, valve springs, retainer
64mm tb bored
itr im port match and runners
jdm itr 4-1 header 2.5 all the way back
bottom:
b18c1 81.5mm
jdm itr or ctr pistons 81.5mm os and connect rods
gsr balance polish crank
</TD></TR></TABLE>
Nobody can tell you that for sure, it'll be hard to even get an estimate on that.
Build it and find out, let us know .
If it's not enough - BOOST.
Here, lemme help you out:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton »</TD></TR><TR><TD CLASS="quote">Things that won't be tolerated:
> Excessive flaming
> Posts with no techincal content
> eBay Ads
> Classifieds ads
> Picture threads
> "I got scammed by..." threads
> Bench racing</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
Infamous
All Motor / Naturally Aspirated
3
04-30-2004 04:40 PM
slogsr
All Motor / Naturally Aspirated
14
12-07-2003 08:58 PM