Rez93del

Hey guys,
Background: 93 del sol (si), has vtec motor and disc brakes. I am doing engine/trans swap. Installing jdm B18C 98 r type.

Question: Can I use any b series axle or does it have to be specific( year 96 vs. 98, b18 vs. b16). I fairly sure my sol has the 32mm bearings which would accept the 4lug b18 axle, but again not entirely sure. I've been reading lots of post, but having trouble find del sol posts relating to this. I'm not doing the 5lug conversion /suspension yet, that's next year. Please, any input would be appreciated, thxs.

i did find a post from 2004 by 94blackhd, I just want to confirm this still holds true, thxs again

94 Civic Si

Here is what I did for my machine:

https://honda-tech.com/forums/honda-.../#post51124896

B18C1 into an EH3

Caoboy

Use any 32mm B series axles, just make sure you're using the correct male or female driver side axle to plug into the intermediate shaft.

Rez93del

Guys, thank you very much for the input, it was greatly needed and be put to use.