Auto to Manual Shifter Plate
#1
Thread Starter
Join Date: Jul 2006
Location: Mid, West, USA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Auto to Manual Shifter Plate
I plan on doing an auto-to-manual swap, along with my GSR swap. And while I was doing some research on that, I stumbled this upon this thread on the Hondaswap forums by a guy Named hondavet:
http://hondaswap.com/hybrid-eg...92081/
He made a really clean windplate/shifter plate I'd love to use in my swap. He mentions that he'd be willing to make more for people if there was interest. So I was just wondering if anyone here knew him or (EVEN BETTER) used his design in their auto swaps. Does anyone know if he uses the HT board? Here are pics:
http://hondaswap.com/hybrid-eg...92081/
He made a really clean windplate/shifter plate I'd love to use in my swap. He mentions that he'd be willing to make more for people if there was interest. So I was just wondering if anyone here knew him or (EVEN BETTER) used his design in their auto swaps. Does anyone know if he uses the HT board? Here are pics:
#5
Honda-Tech Member
Re:
Don't mean to knock the thread, but depending on how much he's charging, I would say that it's totally not necessary. If you're doing the conversion then you have to have something to cut the auto wind plate off so you can easily buy a piece of aluminum and cut a sheet yourself. The round extruded piece that comes up isn't necessary at all either. But hey, it's an idea, and with the mass of people doing this conversion there's a market for it.
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Blk00EJ8)
another application for this product would be for those that cut the floor for an H22 shifter and now run a B series trans again. I have a rather large hole in my floor right now that could use this piece.
Bump for more info
Bump for more info
#13
Thread Starter
Join Date: Jul 2006
Location: Mid, West, USA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: (Blk00EJ8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blk00EJ8 »</TD></TR><TR><TD CLASS="quote">Don't mean to knock the thread, but depending on how much he's charging, I would say that it's totally not necessary. If you're doing the conversion then you have to have something to cut the auto wind plate off so you can easily buy a piece of aluminum and cut a sheet yourself. The round extruded piece that comes up isn't necessary at all either. But hey, it's an idea, and with the mass of people doing this conversion there's a market for it.</TD></TR></TABLE>
Yeah... I know, totally not neccessary for a working swap, but I'm really **** about my car... I'm doing the modified auto windplate to cover the bottom of the hole and I'd like this thing in the cabin to cover the top of the hole to keep road noise to a minimum... peace of mind is a priceless thing for OCD.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dannycraq »</TD></TR><TR><TD CLASS="quote">well the guy hit me up through an email and hes going to make one for me.</TD></TR></TABLE>
Hey, can you PM me his email? Or if he's on HondaTech, tell him to come post in this thread. Thanks!
Yeah... I know, totally not neccessary for a working swap, but I'm really **** about my car... I'm doing the modified auto windplate to cover the bottom of the hole and I'd like this thing in the cabin to cover the top of the hole to keep road noise to a minimum... peace of mind is a priceless thing for OCD.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dannycraq »</TD></TR><TR><TD CLASS="quote">well the guy hit me up through an email and hes going to make one for me.</TD></TR></TABLE>
Hey, can you PM me his email? Or if he's on HondaTech, tell him to come post in this thread. Thanks!
#14
Re: Re: (Mr_Midori)
nah hes not on honda tech, his email is edit email for privacy reasons
just tell em you were the one making the thread on on HT (even though you were)
but yea, good looks on finding that thread. props to both of us too
just tell em you were the one making the thread on on HT (even though you were)
but yea, good looks on finding that thread. props to both of us too
Thread
Thread Starter
Forum
Replies
Last Post
Joey_bornander
Honda Civic (2006 - 2015)
2
09-12-2016 10:09 PM
srt4pilot
Honda CRX / EF Civic (1988 - 1991)
1
05-28-2009 03:02 AM
untuned
Honda Civic / Del Sol (1992 - 2000)
1
06-04-2008 08:13 PM
Dyce
Honda Civic / Del Sol (1992 - 2000)
13
08-21-2007 03:49 AM
Thateguhate
Honda Civic / Del Sol (1992 - 2000)
10
08-17-2007 05:47 AM