boosted k20

hey whats up. Im doing a swap right now in a 95 civic. the car was automatic before with a auto P28 ecu. the engine is a jdm GSR with auto tranny and auto P72 ecu. the OBD1 ecu has four plugs (the extra plug is for automatic stuff). with this P72 auto ecu, there is no need to wire in the TCM right, since the ecu will control all the automatic stuff.


this is what i did. i color matched all the wires from the transmission directly to the ecu. and did the same from the shifter console directly to the extra P72 auto ecu plug. There are two extra wires coming from the transmission that are not wired in. i dont know where these two wires go.


the car starts up and drives in reverse fine. when u put it in drive u need to rev it up really high in order for it to start moving. the two extra wires are coming from the two solenoids on the rear of the tranny.

anyone have any info on wiring up a auto gsr into a civic? any help will be appreciated