Ok.....i am in the process of installing my ecu....
there are 4 ecu plugs on the auto trans......i know that i need to take out a few wires from plug B (the plug that is only found on the auto ecu)......i suppose to connect the green wire w/ black strip and a yellow wire from the auto shifter plug......to the same color wires that i de-pinned from auto ecu plug B...

Here is the problem....on ecu plug B, i found 2 yellow wires and 2 green w/ black strip.....????????

anybody ever done this swap in the past, please drop me a msg.....thanks a lot

ps...its a 97 ex auto to manual....

 

bump