ACT 6 puck question
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: basrah, iraq
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
ACT 6 puck question
alright i realize there are many factors to clutch wear, i have maybe 30 drag strip pass's, but i drive pretty sane on the street, sometimes i get into it but not a lot, there about 54,000 miles on it, its a street light flywheel with xtreme pressure plate and a sprung 6 puck clutch, outside of I,H,E, its stock about how long in a perfect world do you guys think this clutch will last? any input would be awsome!
#2
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: ACT 6 puck question (sgtroseberry)
can you get rolling from a stop in 2nd?
Then it's still good.
Sounds like a good clutch to me.
There's really no exact way to determine how long it will last.
Then it's still good.
Sounds like a good clutch to me.
There's really no exact way to determine how long it will last.
#4
Honda-Tech Member
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: ACT 6 puck question (sgtroseberry)
a friend of mine burned throught one of those in 1 month, it was a boosted LS, putting out like 225tq, not sure what the tq hold rating on that clutch is though, if you just got ihei would say your fine, if your boosting, i dont recomend it as per my experience.
Thread
Thread Starter
Forum
Replies
Last Post