zmr

I got a crx si with 95si head...been running stock 88si intake manifold for a while....changed out intake maifold to a 98ex..i got everything hooked up cool but on top of the manifold there's major vacum leak along the gasket...I used the 92-95gasket...then i used the 96-98which worked a little better,,but there is still major vacum leak...need some help if anyone got this set up..


[Modified by zmr, 9:28 PM 5/7/2002]

datap1mp

sshaikh01

use propper punchations Y0

zmr

Is there anyone out there with a 92-95sohc vtec with a 96-98ex intake manifold on there car...need to figure this crap out...lemme know

brcivic411

i thought the gasgets were the same? did you torque down the bolts to spec?

VTC_CiViC

Sounds to me like you're not torquing the bolts down enough, or the gasket isn't going on flat..