dt6210

At a loss on this one. I dropped the tranny, replaced the clutch and one axle. Hooked everything back up and she won't start. Adjusted and rechecked the clutch pedel, cleaned the battery cables, cleaned the grounds - still won't start. Thought maybe it was flooded, pulled the plugs, oil in cyl. let it air out - still won't start. I can get the engine to turn over (even jumped it to ensure I didn't drain the battery), seems like it wants to catch, but won't.
Seems like the Clutch Interlock Switch is working as I can raise the pedel and break the starter circut. I don't have any clicking comming from the relay or starter...any suggestions