95 civic/b18c1 swap - CV SHAFT does not fully insert into differential
07-05-2012, 10:35 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2011
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
95 civic/b18c1 swap - CV SHAFT does not fully insert into differential
Okay i got a parts bin full of stuff and i thought i had the right intermediate shaft well i don't. I read through the sticky and still not 100% sure what i need. I have a 95 honda civic with a b18c1 swap I put a YS1 cable trans in it and it leaks like a siv. I thought it was just the seal but when i looked the shaft sticks out and the little grove that the seal is supposed to sit on is sticking out. It WILL NOT go in any further. What axle intermediate shaft do i need? PLEASE HELP!!!!
07-05-2012, 03:54 PM
#3
Honda-Tech Member
Join Date: Jan 2011
Location: Portland, OR
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Re: HELP RACE SAT!!! CV SHAFT
you can run a 90-93 integra intermediate shaft with matching seal on drive side or 94-01 b series intermediate shaft with matching driver side seal, have done it both ways myself with no problems. Are you sure its a b series half shaft?
Thread
Thread Starter
Forum
Replies
Last Post
alscrx
Honda CRX / EF Civic (1988 - 1991)
1
02-18-2009 06:26 PM
DC 2
Honda CRX / EF Civic (1988 - 1991)
1
05-02-2004 07:45 PM