Worst Blown Motor i have seen!
#76
Honda-Tech Member
Join Date: Jan 2004
Location: Working in the NRBG, Garage
Posts: 10,475
Likes: 0
Received 0 Likes
on
0 Posts
Re: Worst Blown Motor i have seen! (MidShipCivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MidShipCivic »</TD></TR><TR><TD CLASS="quote">
How did he break a forged rod? </TD></TR></TABLE>
well that one thing we never could figure out. it happened after he found out his head was wrapped and he got a brand new head, then go to the track on the wastegate, and he gets out the hole goes into the second and boom boom goes the motor.
How did he break a forged rod? </TD></TR></TABLE>
well that one thing we never could figure out. it happened after he found out his head was wrapped and he got a brand new head, then go to the track on the wastegate, and he gets out the hole goes into the second and boom boom goes the motor.
#79
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: Nor Cal, California, United States
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Re: Worst Blown Motor i have seen! (marshun)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by marshun »</TD></TR><TR><TD CLASS="quote">i think its hilarious that you ran a 13.9 on slicks.</TD></TR></TABLE>
Whats so funny
Not fast enough? It might not be but I was happy i broke 13's....on a stock B20
Whats so funny
Not fast enough? It might not be but I was happy i broke 13's....on a stock B20
#89
Honda-Tech Member
Join Date: Aug 2004
Location: Altamonte Springs/Orlando, Florida, USA
Posts: 4,638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Worst Blown Motor i have seen! (cranberry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cranberry »</TD></TR><TR><TD CLASS="quote">
well that one thing we never could figure out. it happened after he found out his head was wrapped and he got a brand new head, then go to the track on the wastegate, and he gets out the hole goes into the second and boom boom goes the motor. </TD></TR></TABLE>
Was it the rod bolt improperly torque?
well that one thing we never could figure out. it happened after he found out his head was wrapped and he got a brand new head, then go to the track on the wastegate, and he gets out the hole goes into the second and boom boom goes the motor. </TD></TR></TABLE>
Was it the rod bolt improperly torque?
#91
Honda-Tech Member
Join Date: Dec 2004
Location: i tell you if your nice
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Re: Worst Blown Motor i have seen! Post yours! (Ramon96LS)
damn all these blown motors make me sad. those poor hondas.
the one with the snaped crank has to be the worst one. well good luck to both of you guys on the new set ups
the one with the snaped crank has to be the worst one. well good luck to both of you guys on the new set ups
#92
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: Nor Cal, California, United States
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Re: Worst Blown Motor i have seen! Post yours! (eg6r4eva)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg6r4eva »</TD></TR><TR><TD CLASS="quote">damn all these blown motors make me sad. those poor hondas.
the one with the snaped crank has to be the worst one. well good luck to both of you guys on the new set ups </TD></TR></TABLE>
Thanks im excited and scared at the same time
the one with the snaped crank has to be the worst one. well good luck to both of you guys on the new set ups </TD></TR></TABLE>
Thanks im excited and scared at the same time
#95
Honda-Tech Member
Join Date: Jan 2004
Location: Working in the NRBG, Garage
Posts: 10,475
Likes: 0
Received 0 Likes
on
0 Posts
Re: Worst Blown Motor i have seen! (MidShipCivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MidShipCivic »</TD></TR><TR><TD CLASS="quote">
Was it the rod bolt improperly torque?</TD></TR></TABLE>yes.....because this happened after he got the new head and with the messed up on they had been tuning. then it happened....plus it broke in the middle leaving the piston and rest f the rod at the top and thus kiling the rest of the sleeve and block.
Was it the rod bolt improperly torque?</TD></TR></TABLE>yes.....because this happened after he got the new head and with the messed up on they had been tuning. then it happened....plus it broke in the middle leaving the piston and rest f the rod at the top and thus kiling the rest of the sleeve and block.