♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2007
Location: beech bottom, wv, us
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
i think the one you guys are talking about goes on from the inside, i might be wrong
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
i know this has been asked but im not digging 920+
the wires on the brake res they can be cut and removed correct?
the wires on the brake res they can be cut and removed correct?
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Yes, you should bench bleed the MC. I know you dont want to because of fresh paint but if youre careful you shouldnt have a problem. That doesnt necessarily mean you have to, but youll get a much better pedal feel and better response if you do.
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
So i take it its a hit or miss huh??? im thinking of RTV it alittle so it wouldnt fall off. It doesnt look bad at all though.
Honda-Tech Member
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
I just had a quick question. If ur running stock mounts do you have to use the driver side lower damper mount? I've heard you do from some people and you dont from some people. Just tryin to clarify.
Honda-Tech Member
iTrader: (1)
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
looking good, just bleed the thing get a bottle and your good to go its easy
Honda-Tech Member
Join Date: Aug 2007
Location: elizabeth, nj, union
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
I had the same issue with mines so i got one from my boy that he sells and it fits perfect and for the smaller one it goes in threw the inside of the car...
Honda-Tech Member
Join Date: Aug 2007
Location: elizabeth, nj, union
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Honda-Tech Member
Join Date: May 2007
Location: Sin City, NV
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
ok so far i got one saying i should, and one sayin i dont have to ... the only reason i would think it wouldnt matter is cause i have to bleed the whole thing, but at the same time i only think , haha thanks for your help bro
Honda-Tech Member
Re:
What I did instead of bench bleeding the mc was pour the fluid into the reservoir with it out of the car it until started coming out of the two ports. Then I installed it and bled the front calipers normally. I was golden.
There is a lot of air in it though if you don't do this or bench bleed it
There is a lot of air in it though if you don't do this or bench bleed it
Honda-Tech Member
Join Date: May 2007
Location: Sin City, NV
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
Re:
What I did instead of bench bleeding the mc was pour the fluid into the reservoir with it out of the car it until started coming out of the two ports. Then I installed it and bled the front calipers normally. I was golden.
There is a lot of air in it though if you don't do this or bench bleed it
There is a lot of air in it though if you don't do this or bench bleed it
Honda-Tech Member
Join Date: Aug 2003
Location: FRESNO, CA, U.S.A
Posts: 2,246
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
i had mine there... and my oddyssey would not hold a charge... i guess you can say that i re-re-routed my battery to the trunk... just picked up a brailee yesterday so no more stock *** battery... my plans are to get to the track, and under the seat wont pass tech... even if a sealed battery im sure.
HRD PKR
Join Date: Nov 2005
Location: Gods wonderland
Posts: 13,211
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
i had mine there... and my oddyssey would not hold a charge... i guess you can say that i re-re-routed my battery to the trunk... just picked up a brailee yesterday so no more stock *** battery... my plans are to get to the track, and under the seat wont pass tech... even if a sealed battery im sure.
My odyssey is under my passenger seat as well and holds its charge perfect....
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2007
Location: beech bottom, wv, us
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
i had a pc 680 that wouldnt hold charge too, went to a stock one in the spare tire well.
Honda-Tech Member
Join Date: Aug 2007
Location: elizabeth, nj, union
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Honda-Tech Member
Join Date: Aug 2007
Location: elizabeth, nj, union
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2001
Location: Long Beach, ca, usa
Posts: 2,473
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Anyone have any suggestions on an aluminum spark plug cover? (b series) I'm sure it's been talked about, but I didn't get much info trying to look through 1100+ pages!
The AEM and Skunk ones are super pricey, the cheaper ebay ones aren't the same shape/contour as the stock piece. I'm looking for something w/ the stock shape and no logos. Any color is fine as I can just strip the anodizing since I plan on a high polish anyway.
The AEM and Skunk ones are super pricey, the cheaper ebay ones aren't the same shape/contour as the stock piece. I'm looking for something w/ the stock shape and no logos. Any color is fine as I can just strip the anodizing since I plan on a high polish anyway.