My DIY CTR "Style" Grill How To (56k OK)
#53
Re: My DIY CTR "Style" Grill How To (98EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98EK »</TD></TR><TR><TD CLASS="quote">That's what you call, balla on a budget </TD></TR></TABLE>
Straight Thuggin'
Straight Thuggin'
#54
Re: My DIY CTR "Style" Grill How To (DANgerous)
i got a civic hb dx and my grill is one piece too!
i was just about to go do it and dumb grill is one piece! anyone wanna sell me there grill so ic an do it? oem silver would be good!
i was just about to go do it and dumb grill is one piece! anyone wanna sell me there grill so ic an do it? oem silver would be good!
#55
Re: My DIY CTR "Style" Grill How To (akteamster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by akteamster »</TD></TR><TR><TD CLASS="quote">i got a civic hb dx and my grill is one piece too!
i was just about to go do it and dumb grill is one piece! anyone wanna sell me there grill so ic an do it? oem silver would be good!</TD></TR></TABLE>
Not to be a dick....but if your gonna buy one, why not just buy one already made?
PS..Jackson Heights has the bangin bitches
i was just about to go do it and dumb grill is one piece! anyone wanna sell me there grill so ic an do it? oem silver would be good!</TD></TR></TABLE>
Not to be a dick....but if your gonna buy one, why not just buy one already made?
PS..Jackson Heights has the bangin bitches
#56
Re: My DIY CTR "Style" Grill How To (akteamster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by akteamster »</TD></TR><TR><TD CLASS="quote">i got a civic hb dx and my grill is one piece too!
i was just about to go do it and dumb grill is one piece!</TD></TR></TABLE>
I'm sure it can still be done...all it takes is a little ingenuity.
You can make it work. Good luck.
i was just about to go do it and dumb grill is one piece!</TD></TR></TABLE>
I'm sure it can still be done...all it takes is a little ingenuity.
You can make it work. Good luck.
#57
Re: My DIY CTR "Style" Grill How To (B20vtecNJcoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B20vtecNJcoupe »</TD></TR><TR><TD CLASS="quote">
Not to be a dick....but if your gonna buy one, why not just buy one already made?
PS..Jackson Heights has the bangin bitches </TD></TR></TABLE>
Well, I bought one...it looked like *** and fit like ***. Not sayin' that all of them are shitty. So I went ahead and scrapped it and went the DIY route. I'm happy with the new look. Although the paint isn't holding up very well. I got owned by a semi-truck on one of the passes here in Montana. I was gonna pass these two semis, so I'm going to pass. Just as I get up to the rear truck the numb nutz decides to pass the semi in front of him. He didn't even signal. Since the road was going over one of the passes, it had sand all over it, because it has already snowed up there. As the truck cut in front of me, it was like a hail of machine gun fire. My poor car was most definately wounded, but not unable to go on. After the semi passed the other semi, I got up some speed 90 mph +....impressive for my little d16y7 going up a steep incline....and passed both trucks making sure to cut off the truck in front. I would have given him the finger, but I was driving with my mom to go visit some relatives. I'll post a pic in a few.
Semi Trucks
Not to be a dick....but if your gonna buy one, why not just buy one already made?
PS..Jackson Heights has the bangin bitches </TD></TR></TABLE>
Well, I bought one...it looked like *** and fit like ***. Not sayin' that all of them are shitty. So I went ahead and scrapped it and went the DIY route. I'm happy with the new look. Although the paint isn't holding up very well. I got owned by a semi-truck on one of the passes here in Montana. I was gonna pass these two semis, so I'm going to pass. Just as I get up to the rear truck the numb nutz decides to pass the semi in front of him. He didn't even signal. Since the road was going over one of the passes, it had sand all over it, because it has already snowed up there. As the truck cut in front of me, it was like a hail of machine gun fire. My poor car was most definately wounded, but not unable to go on. After the semi passed the other semi, I got up some speed 90 mph +....impressive for my little d16y7 going up a steep incline....and passed both trucks making sure to cut off the truck in front. I would have given him the finger, but I was driving with my mom to go visit some relatives. I'll post a pic in a few.
Semi Trucks
#61
Re: (DC_andrew)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC_andrew »</TD></TR><TR><TD CLASS="quote">Any new mods to the car lately Dan...besides the grille and such?</TD></TR></TABLE>
Negative for now.
Negative for now.
#62
Re: (gabebauman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gabebauman »</TD></TR><TR><TD CLASS="quote"> ek four
I used expanded metal for mine.
</TD></TR></TABLE>
where do you find this expanded metal? it looks perfect.
also did you paint it? thanks for the write up DANgerous i'll be doing this mod soon
I used expanded metal for mine.
</TD></TR></TABLE>
where do you find this expanded metal? it looks perfect.
also did you paint it? thanks for the write up DANgerous i'll be doing this mod soon
#63
Re: My DIY CTR "Style" Grill How To (JDmEGmaniac)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDmEGmaniac »</TD></TR><TR><TD CLASS="quote">great diy...looks good </TD></TR></TABLE>
#70
Re: My DIY CTR "Style" Grill How To (Hella_JDM)
My DIY CTR style grill is in the process right now. I would also like to know where to ge the expanded metal.
BTW, I have an EX. I found a 2 piece grill for like $5 and now cleaning it up to get paint matched.
BTW, I have an EX. I found a 2 piece grill for like $5 and now cleaning it up to get paint matched.
#71
stay underground!
Joined: Apr 2004
Posts: 648
Likes: 0
From: double clutchin' in a hood near you...it's crazy right?
Re: My DIY CTR "Style" Grill How To (DOHC4life)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOHC4life »</TD></TR><TR><TD CLASS="quote">My DIY CTR style grill is in the process right now. I would also like to know where to ge the expanded metal.
BTW, I have an EX. I found a 2 piece grill for like $5 and now cleaning it up to get paint matched. </TD></TR></TABLE>
get the expanded metal from any ace's hardware. they got the nice ones!
BTW, I have an EX. I found a 2 piece grill for like $5 and now cleaning it up to get paint matched. </TD></TR></TABLE>
get the expanded metal from any ace's hardware. they got the nice ones!
#73
Re: My DIY CTR "Style" Grill How To (Hella_JDM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM »</TD></TR><TR><TD CLASS="quote">your "real deal" ctr grill with fake *** lights, nice </TD></TR></TABLE>
HAHA!
djSALIX that looks good man.
HAHA!
djSALIX that looks good man.