EATIN UP UR BSERIES

LOOKING thru the thread..found this thought it was ironic,,lol

HatchVX

what are the rules on Cut off switches? any body got pics on EG that arnt mounted to the outside?

JDM99GSR

would this one wont leak at all because of the way is laying down?

ADN DOES ANY BODY KNOWS A LINK ON WHERE TO BUY A BATTERY HOLDER LIKE THIS ONE^^^^^^^^^^^^ON TOP

mugen-k

iTrader: (1)

summitracing.com

ohsnapzafingcu

iTrader: (2)

it's a drycell, so there's no fluid in it to leak

Moosecakes

here's mine, i haven't put the trunk carpet back in or ran the wires for my jumper terminals yet but here it is.
*forgive the wires that were extended... I made a stupid and didn't measure right so I ended up having to solder a bit extra, solder joints are perfect though, they flowed complete and all the way threw.*

The lid is coming I just have to clean up the inside welds so it will fit right and drill and tap the sides for the bolts to hold it in place, I really need to get a different battery. Hopefully this is safe for now lol

fox_137

Did you vent the battery to the outside?

Moosecakes

gah ****.... I forgot.. whats the best way to do that?

Arthas

That doesnt look safe lol...

Moosecakes

uh explain please?

fox_137

I don't really know.. I was at the track witht that same set up and they told me the only way to run is if it was vented to the out side, I asked but they didn't explain it to me... so I put it back in the engine bay..

[Ennis_D]

iTrader: (1)

Okay guys...Where are you getting your 1gauge battery ring terminals?

For ref:

hkwe36

bump!

HatchVX

has anybody had a problem with their alt. charging their battery when its relocated?

Ldo

Regular lead acid battery releases hydrogen gas as it's being charged by the alternator, and that stuff can be deadly or explosive. Because of that, the battery casing cannot be completely sealed to allow for the gas to escape. When you move that type of battery inside your car, the gas will escape and stay inside your cabin and can ignite. You can put it in a box, put a cap on it and seal it tight, poke a hole and run a hose to the outside.

This is why drycell batteries are often used inside the car as they are considered sealed batteries and don't emit gas.

Linh.

Yep it can blow up like a bomb

Slopoke

Im building a bracket to mount my small battery under the rear bumper, but until I finish it, I have hit ghetto mounted in the hatch.



And yes, I used quarters for washers. lol

HatchVX

Here is my battery relocation. It will change up once i get my yellow top battery. It uses a 100 amp breaker, and a 200 amp cut off switch.







The only thing you see from the outside

92integraVTECgsr

What is the best gauge wire to use for the positive to relocate the battery to the trunk?

iv

bump for good ideas

boarding2008

im having a hard time finding a battery that will work.. mainly cuz i dont know which one will work haha. would that kinetik hc600 up above work for a build and turbo d16z6? only electonics would be gauges, a radio and two regular speakers, and maybe two tweeters.

skavenger*ef9

heres mine nothing special

CRX EF 88

Guys with them mounted under the passenger side front bumper, How do you have your cables ran to be hidden?

Finnish_Racer

now thats just a mess.....almost as bad as mine.
stupid idiot guy used jumper cable wire and half-assed the whole thing! :S
next buy is buy a drycell from summit or password, and then a bracket to mount in under my front passenger part of the bumper. lol

airmaxbri

more EG's please