The Player

Yes, you cant have tow in front (in regulation, but i have too black windows and i have no problem with this). With this Denji i bought bulbs H3 Philips Blue Vision.

Joon Joon

iTrader: (1)

i see... with the denjis, the h3 bulb is still a small bulb... the output isnt as great as stock but thats just my opinion on what to do with those lights..

The Player

It is obvious that HID is better, but polish regulations

Joon Joon

iTrader: (1)

they wont know if you put an hid projector in there will they?/ haha.. not just hids but real hid projecotrs

The Player

But if You want put an HID (with all necessary accesories) they see that instalation isnt stock.

Joon Joon

iTrader: (1)

you could make it look stock but its all good...

The Player

Ok. I find photo with rear tow .

low&slow

is it hard 2 put a s2k cluster on?

KinDx

well normally they go for $200-300
depends on your swap you will need a speedo converted box 60-80other converter to adjust the temp. $60-80
there are wiring diagrams everywhere, pretty easy

in my case, (cheap bastard) i installed a temperature gauge $20 its also more accurate. (numbers) and since i have a newer K series tranny, the speedo signal is the same... to make story short, for me this cluster was the cheapest way to go since i didnt have a cluster to begin with.

low&slow

oh its not that bad i was expecting a higher price

im a look into those now
does it matter what year of a s2k the cluster is from?

KinDx

they are a little different but only 2 options Ap1 or Ap2
find out which one you like best.

SL0WEGG

60-80 for the speedo healer? where? sign me up. Its more like 100-120ish. If you can't find an ap1 cluster with pigtails, i'd look for an ap2 cluster. It was a bitch for me to find em and I paid out of the *** for some lol

KinDx

You are right man, it costs $100+

disturbed83

Is it me, or my ABS is missing some fuses...

Joon Joon

iTrader: (1)

dont have the lid for it? it'll tell you whats missing, if anything

disturbed83

Yeah it does have the lid but it doesnt say anything any more..

Joon Joon

iTrader: (1)

have you downloaded the manual??

can download it here
http://www.hondahookup.com/manuals/

The Player

I propably remove front tow hook...

g230sport

**** ia is coming up fast

so little time, so little money

Snailor Built

new project had for about a week. Sprayed and tucked the bay, ill be adding pics as i go. Thanks for looking.

low&slow

how do i take off the cluster to fix my speedometer on an ej2?

EJ1 LS guy

have you checked your VSS(vehicle speed sensor)? problem may not be the cluster.

low&slow

na it works, i see it go up, its just stuck below the 0 stick. i just need to take off the protector so i can put the speedometer OVER the 0 stick.

EJ1 LS guy

oh. ok. well mine had two screws that screw up into the cover. then i just carefully popped each side out. make sure you disconnect the hasard plug. and make sure you do it gently or you'll break your vent.

low&slow

i thought so, thanks. how do you disconnect the hazard plug?