<<<POST YOUR SLAMMED CARS: PART 6>>>
Honda-Tech Member
Join Date: Jun 2004
Location: Seattle
Posts: 6,416
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-sol_si »</TD></TR><TR><TD CLASS="quote">Well mines not as dumped as some of the cars here but here goes: Omni sleeve overs KYB adjustables, racing hart cp035 15x6.5....I'll be raising it about 3/4" tommorrow(damn housing trrack with a speed bump or dip every 50 feet
).
My wheels on it
</TD></TR></TABLE>
Not dumped. At all. I think I still see wheel gap
This is better -
![](https://honda-tech.com/forums/images/smilies/emthdown.gif)
![](https://honda-tech.com/forums/images/smilies/emthdown.gif)
My wheels on it
![](https://img214.imageshack.us/img214/8651/20060727image0012hy9.jpg)
Not dumped. At all. I think I still see wheel gap
![](https://honda-tech.com/forums/images/smilies/emthdown.gif)
This is better -
![](https://img.photobucket.com/albums/v226/got_no_sol/d50/d50-3.jpg)
Honda-Tech Member
Join Date: Jan 2006
Location: Seymour Johnson AFB, USA
Posts: 1,303
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by a_s_ol_ »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
lovin the cleanliness
![](https://img.photobucket.com/albums/v226/got_no_sol/d50/d50-3.jpg)
lovin the cleanliness
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lilaznsnipah »</TD></TR><TR><TD CLASS="quote">
haha freal.... thats pretty mickey mouse status... the best investment is a full coilover setup, like tein SS, might be alot of money, but it was damn worth the investment... n the coilover comes SAFELY WELDED to the shock . WOOT! </TD></TR></TABLE>
Hell my old H&R spring/AGX setup ran me a grand total of ~$400
And as you can see here, not slammed, but still rather low for just a basic spring/shock combo, not to mention it rode great.
![](https://img.photobucket.com/albums/v304/jamesmartinelli/Picture001.jpg)
I am just trying to steer some people away from the headache of ghetto rigging their rides.
haha freal.... thats pretty mickey mouse status... the best investment is a full coilover setup, like tein SS, might be alot of money, but it was damn worth the investment... n the coilover comes SAFELY WELDED to the shock . WOOT! </TD></TR></TABLE>
Hell my old H&R spring/AGX setup ran me a grand total of ~$400
And as you can see here, not slammed, but still rather low for just a basic spring/shock combo, not to mention it rode great.
![](https://img.photobucket.com/albums/v304/jamesmartinelli/Picture001.jpg)
I am just trying to steer some people away from the headache of ghetto rigging their rides.
* B A N N E D *
Join Date: Feb 2004
Location: portland, oregon, usa
Posts: 1,246
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
arent stock honda shocks oil not gas shocks?
would a couple beads from an oxygen acetylene welder really blow you all up?
does everyone have to spend a couple hundred dollars on a 90 civic sedan just because he wants to go low?
im sure he is rolling on stock shocks already which are already blown, i offer a low cost solution for aesthetic results and all you guys hate cuz your cool with full bodies.
yeah i have done that setup before, and yeah it rode like ish. but other than the bumpy-ness it was acost effective result for my friends with low LOW budget who just wanted to make their ride look like mine.
i havent rolled sleeve overs for a long time
i currently roll aragosta full threads on my type R
apex-n1's on my EK coupe
and i got a set of skunk2 full threads in the wings for my next car.
quit being so negative and you try and come up with a solution aside from BUY FULL THREADS!! for all the guys who post here asking "how do i get my car lower?"
would a couple beads from an oxygen acetylene welder really blow you all up?
does everyone have to spend a couple hundred dollars on a 90 civic sedan just because he wants to go low?
im sure he is rolling on stock shocks already which are already blown, i offer a low cost solution for aesthetic results and all you guys hate cuz your cool with full bodies.
yeah i have done that setup before, and yeah it rode like ish. but other than the bumpy-ness it was acost effective result for my friends with low LOW budget who just wanted to make their ride look like mine.
i havent rolled sleeve overs for a long time
i currently roll aragosta full threads on my type R
apex-n1's on my EK coupe
and i got a set of skunk2 full threads in the wings for my next car.
quit being so negative and you try and come up with a solution aside from BUY FULL THREADS!! for all the guys who post here asking "how do i get my car lower?"
Honda-Tech Member
Join Date: May 2005
Location: murrrrland
Posts: 13,296
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cain Marko »</TD></TR><TR><TD CLASS="quote">
And as you can see here, not slammed, but still rather low for just a basic spring/shock combo, not to mention it rode great.
</TD></TR></TABLE>
so why are u posting it here?
And as you can see here, not slammed, but still rather low for just a basic spring/shock combo, not to mention it rode great.
</TD></TR></TABLE>
so why are u posting it here?
Honda-Tech Member
Join Date: Jan 2006
Location: Seymour Johnson AFB, USA
Posts: 1,303
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanong87 »</TD></TR><TR><TD CLASS="quote">
so why are u posting it here?</TD></TR></TABLE>
because he reads the thread
so why are u posting it here?</TD></TR></TABLE>
because he reads the thread
Honda-Tech Member
Join Date: Jun 2004
Location: Seattle
Posts: 6,416
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by street_racer_NC »</TD></TR><TR><TD CLASS="quote">lovin the cleanliness </TD></TR></TABLE>
ty![](https://honda-tech.com/forums/images/smilies/emsmile.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by street_racer_NC »</TD></TR><TR><TD CLASS="quote">because he reads the thread</TD></TR></TABLE>
ha ha ownt.
ty
![](https://honda-tech.com/forums/images/smilies/emsmile.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by street_racer_NC »</TD></TR><TR><TD CLASS="quote">because he reads the thread</TD></TR></TABLE>
ha ha ownt.
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
Honda-Tech Member
Join Date: Jul 2005
Location: DiEGO, CA, USA
Posts: 6,954
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lilaznsnipah »</TD></TR><TR><TD CLASS="quote">the infamous colored/ b&w shot...
</TD></TR></TABLE>
ahah took me awhile to figure out how to do that (dont have photoshop, only have it at my gurls house).. but i did it finally.. too bad it dsnt really work with a white car.. lol. well i can see the blue pearl more now..
![](https://i12.photobucket.com/albums/a207/lilaznsnipah/DSC_0123.jpg)
ahah took me awhile to figure out how to do that (dont have photoshop, only have it at my gurls house).. but i did it finally.. too bad it dsnt really work with a white car.. lol. well i can see the blue pearl more now..
![](https://i47.photobucket.com/albums/f196/jesdm/JDMBW3.jpg)
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2003
Location: La La Land, CA
Posts: 14,023
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by espanol »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
More of this!!!!!!
![](http://www.imagestation.com/picture/sraid209/pbc71e608364069af62e8c3a746fc32b1/ee06f42f.jpg)
More of this!!!!!!
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
Honda-Tech Member
Join Date: May 2006
Location: festus, missouri, usa
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
Back in the day before i knew better i bought a 95 celica gt-s brand new...had it 2 weeks and slammed that bitch. we took 3 coils ou of a 5 coil spring on the front. It rode like ***, my girl would not evne ride with me and on big bumps the shock would unload and the sp ring would fall off the perch but dam did it look good. It looks nice but im a wimp i cant do it to me or my cars anymore. Good stuff guys keep them coming
Honda-Tech Member
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Whytey »</TD></TR><TR><TD CLASS="quote">thought maybe I would add more of my POS, I love slammed cars
</TD></TR></TABLE>
Looks good and dumped. Definately needs some wheels though...
for a modesto cat.
</TD></TR></TABLE>
Looks good and dumped. Definately needs some wheels though...
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
Honda-Tech Member
Join Date: Nov 2001
Location: Las Vegas, u.s
Posts: 18,266
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
yep Whytey you are slammed
but please fix your bumper and headlights, they have bigger gaps then madonna's teeth. Or your body parts are just scared of each other and trying to get away.
Modified by -Gambit- at 1:05 AM 8/2/2006
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
but please fix your bumper and headlights, they have bigger gaps then madonna's teeth. Or your body parts are just scared of each other and trying to get away.
Modified by -Gambit- at 1:05 AM 8/2/2006
Botched thread poll
Join Date: Sep 2002
Location: Helena, MT
Posts: 2,164
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hcivic02 »</TD></TR><TR><TD CLASS="quote">looks nice but what lip? Also, dayymnn...get some new headlights, those are grosss lol.</TD></TR></TABLE>
actually you don't have to waste your money on new headlights. remove them, sand with 600 grit, then 800, then 1000, then 1500, then polish the **** out of them with meguirs plastx polish. they will bling harder than new headlights:
can't totally appreciate the out come due to low quality picture, but just know that they were worse than yours to start with.
![](http://myspace-875.vo.llnwd.net/00109/57/87/109047875_l.jpg)
as far as the front end, yeah you would have been a prime candidate for the ek hood gap crew
she's been in a little fender bender or two...
to fix it you need to remove your front bumper, put the front of the car up on jackstands, and take a big *** sledge hammer to your front bumper support from the bottom pushing up. every now and then slide your front bumper back on to test for fitment until it looks great.
edit: CAR IN PIC IS NOT INTENDED TO BE SLAMMED, i am not one of THOSE retards. PIC IS FOR EDUCATIONAL PURPOSES ONLY
actually you don't have to waste your money on new headlights. remove them, sand with 600 grit, then 800, then 1000, then 1500, then polish the **** out of them with meguirs plastx polish. they will bling harder than new headlights:
can't totally appreciate the out come due to low quality picture, but just know that they were worse than yours to start with.
![](http://myspace-875.vo.llnwd.net/00109/57/87/109047875_l.jpg)
as far as the front end, yeah you would have been a prime candidate for the ek hood gap crew
![](https://honda-tech.com/forums/images/smilies/emsmilep.gif)
to fix it you need to remove your front bumper, put the front of the car up on jackstands, and take a big *** sledge hammer to your front bumper support from the bottom pushing up. every now and then slide your front bumper back on to test for fitment until it looks great.
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
edit: CAR IN PIC IS NOT INTENDED TO BE SLAMMED, i am not one of THOSE retards. PIC IS FOR EDUCATIONAL PURPOSES ONLY
![](https://honda-tech.com/forums/images/smilies/emsmilep.gif)
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fourcsan »</TD></TR><TR><TD CLASS="quote">arent stock honda shocks oil not gas shocks?
would a couple beads from an oxygen acetylene welder really blow you all up?
does everyone have to spend a couple hundred dollars on a 90 civic sedan just because he wants to go low?
im sure he is rolling on stock shocks already which are already blown, i offer a low cost solution for aesthetic results and all you guys hate cuz your cool with full bodies.
yeah i have done that setup before, and yeah it rode like ish. but other than the bumpy-ness it was acost effective result for my friends with low LOW budget who just wanted to make their ride look like mine.
i havent rolled sleeve overs for a long time
i currently roll aragosta full threads on my type R
apex-n1's on my EK coupe
and i got a set of skunk2 full threads in the wings for my next car.
quit being so negative and you try and come up with a solution aside from BUY FULL THREADS!! for all the guys who post here asking "how do i get my car lower?" </TD></TR></TABLE>
I am not saying I am cool with full bodied coilovers. Here is a concept, dont ******* rush **** either, I drove a STOCK cx for a year and a half while I saved up enough cash for wheels/suspension/motor...if I can do it, anyone can. And who the **** lays beads with oxy/ace?! Stone age technology my friend, and you have to be good at what you do to lay a nice bead with oxy. MIG would be the most cost efficient and TIG would be more expensive but the most reliable.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanong87 »</TD></TR><TR><TD CLASS="quote">
so why are u posting it here?</TD></TR></TABLE>
Because I rule and can pretty much do whatever I want. Do you know who the **** I am?
Not to mention I have posted numerous pictures of my car, so I think a picture from before I was slammed wont hurt, and if you happen to think it will, then you can kindly plant your lips on my ********
would a couple beads from an oxygen acetylene welder really blow you all up?
does everyone have to spend a couple hundred dollars on a 90 civic sedan just because he wants to go low?
im sure he is rolling on stock shocks already which are already blown, i offer a low cost solution for aesthetic results and all you guys hate cuz your cool with full bodies.
yeah i have done that setup before, and yeah it rode like ish. but other than the bumpy-ness it was acost effective result for my friends with low LOW budget who just wanted to make their ride look like mine.
i havent rolled sleeve overs for a long time
i currently roll aragosta full threads on my type R
apex-n1's on my EK coupe
and i got a set of skunk2 full threads in the wings for my next car.
quit being so negative and you try and come up with a solution aside from BUY FULL THREADS!! for all the guys who post here asking "how do i get my car lower?" </TD></TR></TABLE>
I am not saying I am cool with full bodied coilovers. Here is a concept, dont ******* rush **** either, I drove a STOCK cx for a year and a half while I saved up enough cash for wheels/suspension/motor...if I can do it, anyone can. And who the **** lays beads with oxy/ace?! Stone age technology my friend, and you have to be good at what you do to lay a nice bead with oxy. MIG would be the most cost efficient and TIG would be more expensive but the most reliable.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanong87 »</TD></TR><TR><TD CLASS="quote">
so why are u posting it here?</TD></TR></TABLE>
Because I rule and can pretty much do whatever I want. Do you know who the **** I am?
Not to mention I have posted numerous pictures of my car, so I think a picture from before I was slammed wont hurt, and if you happen to think it will, then you can kindly plant your lips on my ********
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
Honda-Tech Member
Join Date: Feb 2005
Location: The Five Four One, United States
Posts: 1,442
Likes: 0
Received 2 Likes
on
1 Post
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -Gambit- »</TD></TR><TR><TD CLASS="quote">yep Whytey you are slammed
but please fix your bumper and headlights, they have bigger gaps then madonna's teeth. Or your body parts are just scared of each other and trying to get away.
Modified by -Gambit- at 1:05 AM 8/2/2006</TD></TR></TABLE>
such a kidder gambit
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
but please fix your bumper and headlights, they have bigger gaps then madonna's teeth. Or your body parts are just scared of each other and trying to get away.
Modified by -Gambit- at 1:05 AM 8/2/2006</TD></TR></TABLE>
such a kidder gambit
![](https://honda-tech.com/forums/images/smilies/emwink.gif)
Botched thread poll
Join Date: Sep 2002
Location: Helena, MT
Posts: 2,164
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
i was just in my garage drooling over the koni's i picked up yesterday, and i plan to slam the miata as soon as the gc's get here, and then even lower with aftermarket top hats.
i have a ?question? for you dumped fellows who made a mistake and took out your oil pans...
did you suffer any engine damage etc? or was it just replacing the oil pan...no big deal.
i have no problem driving carefully and avoiding road imperfections, but in the event that something extreme does go wrong...how often is engine damage a result?
the pic of the totally cracked oil pan a few pages back got me a bit scared...
i have a ?question? for you dumped fellows who made a mistake and took out your oil pans...
did you suffer any engine damage etc? or was it just replacing the oil pan...no big deal.
i have no problem driving carefully and avoiding road imperfections, but in the event that something extreme does go wrong...how often is engine damage a result?
the pic of the totally cracked oil pan a few pages back got me a bit scared...
Honda-Tech Member
Join Date: Nov 2004
Location: Hella Nor Cal
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
haha yeah im getting new headlights from my friends civic he doesnt even drive, more like a trade, and THE gaps, are because when I bought the car it had NO bumper support, so everything just kinda hangs, yeah gaps like Madonna but I need to get a support cus I dont wanna break anything incase a car hits me (knock on wood) yeah modesto sucks also but I heard they are ganna fix the bumps here haha.... yeah right..
Modified by Whytey at 6:38 PM 8/1/2006
Modified by Whytey at 6:38 PM 8/1/2006
Honda-Tech Member
Join Date: Nov 2004
Location: Hella Nor Cal
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BIGBLOCKEK »</TD></TR><TR><TD CLASS="quote">
actually you don't have to waste your money on new headlights. remove them, sand with 600 grit, then 800, then 1000, then 1500, then polish the **** out of them with meguirs plastx polish. they will bling harder than new headlights:
can't totally appreciate the out come due to low quality picture, but just know that they were worse than yours to start with.
![](http://myspace-875.vo.llnwd.net/00109/57/87/109047875_l.jpg)
as far as the front end, yeah you would have been a prime candidate for the ek hood gap crew
she's been in a little fender bender or two...
to fix it you need to remove your front bumper, put the front of the car up on jackstands, and take a big *** sledge hammer to your front bumper support from the bottom pushing up. every now and then slide your front bumper back on to test for fitment until it looks great.
edit: CAR IN PIC IS NOT INTENDED TO BE SLAMMED, i am not one of THOSE retards. PIC IS FOR EDUCATIONAL PURPOSES ONLY
</TD></TR></TABLE>
yeah man.. I dont even have a support hahaha but the headlights are either ganna be cleaned or like I said above just ganna get the new ones from my friend, the reason I said I had no lip is because everyone keeps saying for me to get one... I'm like why? so I break it in 2 days haha
actually you don't have to waste your money on new headlights. remove them, sand with 600 grit, then 800, then 1000, then 1500, then polish the **** out of them with meguirs plastx polish. they will bling harder than new headlights:
can't totally appreciate the out come due to low quality picture, but just know that they were worse than yours to start with.
![](http://myspace-875.vo.llnwd.net/00109/57/87/109047875_l.jpg)
as far as the front end, yeah you would have been a prime candidate for the ek hood gap crew
![](https://honda-tech.com/forums/images/smilies/emsmilep.gif)
to fix it you need to remove your front bumper, put the front of the car up on jackstands, and take a big *** sledge hammer to your front bumper support from the bottom pushing up. every now and then slide your front bumper back on to test for fitment until it looks great.
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
![](https://honda-tech.com/forums/images/smilies/emthup.gif)
edit: CAR IN PIC IS NOT INTENDED TO BE SLAMMED, i am not one of THOSE retards. PIC IS FOR EDUCATIONAL PURPOSES ONLY
![](https://honda-tech.com/forums/images/smilies/emsmilep.gif)
yeah man.. I dont even have a support hahaha but the headlights are either ganna be cleaned or like I said above just ganna get the new ones from my friend, the reason I said I had no lip is because everyone keeps saying for me to get one... I'm like why? so I break it in 2 days haha