The Official EF Discussion Thread
Honda-Tech Member
Joined: Mar 2004
Posts: 2,804
Likes: 0
From: Malibu of the desert Hesperia, ca, USA
Re: (408wdy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy »</TD></TR><TR><TD CLASS="quote">yeah his friend scammed me for a x-member and an intake headlight 
</TD></TR></TABLE>
yeah his "friend" scammed him for alot more then a x-member and intake headlight...
I think its funny because so many of the people that get so up tight about the stuff Chad does...do the exact same thing. So much of the stuff he says/does is so tongue cheek its not even funny.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RickyGD »</TD></TR><TR><TD CLASS="quote">lmao Dicktones made this site entertaining.</TD></TR></TABLE>
</TD></TR></TABLE>yeah his "friend" scammed him for alot more then a x-member and intake headlight...
I think its funny because so many of the people that get so up tight about the stuff Chad does...do the exact same thing. So much of the stuff he says/does is so tongue cheek its not even funny.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RickyGD »</TD></TR><TR><TD CLASS="quote">lmao Dicktones made this site entertaining.</TD></TR></TABLE>
Honda-Tech Member
Joined: Mar 2005
Posts: 6,176
Likes: 0
From: san jo
Re: (CBEengineering)
ahah i've heard of it but never seen it.. to be honest i just wished he would have just been like hey you're never gonna get it 4 months ago. so i could have ordered another one.. i'll have to order a fullrace soon. it's the last part i need to finish the crx
Senior Member
Joined: Dec 2004
Posts: 10,137
Likes: 0
From: EMAIL ME at Chase@ChaseBaysOnline.com
Re: (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">
I'll supply the herb-age and the babe-age. I might just wait until then to wire up the cluster and whatnot. When are you going out there?</TD></TR></TABLE>
Gnarly, yeah ill go wiring crazy man. Late august.
Ill drive 10 hours straight to OK, then to Vegas and blow my life savings.
I'll supply the herb-age and the babe-age. I might just wait until then to wire up the cluster and whatnot. When are you going out there?</TD></TR></TABLE>
Gnarly, yeah ill go wiring crazy man. Late august.
Ill drive 10 hours straight to OK, then to Vegas and blow my life savings.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (EF8kid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8kid »</TD></TR><TR><TD CLASS="quote">
Gnarly, yeah ill go wiring crazy man. Late august.
Ill drive 10 hours straight to OK, then to Vegas and blow my life savings. </TD></TR></TABLE>
Sweet, hopefully I'll have it in some paint by then.
Gnarly, yeah ill go wiring crazy man. Late august.
Ill drive 10 hours straight to OK, then to Vegas and blow my life savings. </TD></TR></TABLE>
Sweet, hopefully I'll have it in some paint by then.
Honda-Tech Member
Joined: Sep 2003
Posts: 9,235
Likes: 0
From: SC
Re: (UltimX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">
How much do ef armrests go for?</TD></TR></TABLE>
More than you can afford pal. Honda.
jk, I got mine from a guy in the Netherlands for I think $50 shipped a couple years ago.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by team-savage »</TD></TR><TR><TD CLASS="quote">i went to the shop and got my ecu pr3. so now i just need random parts. tell me if i need to add anything to my list
already have
hasport mounts/shift linkage
rad hoses
b16/lsd trans
Ecu
Need
Shifter stabalizer bushing (del sol vtec)
DA non abs axles
coolant
oil/filter
DA throttle cable
mtf
5 16v wires (different colours)
new alt. belt (ditching a/c)
hopefully after this there wont' be to many unexpected expenses.
</TD></TR></TABLE>
make sure you get the correct driver side axle tyo mate with your intermediate shaft. (male - female)
How much do ef armrests go for?</TD></TR></TABLE>
More than you can afford pal. Honda.
jk, I got mine from a guy in the Netherlands for I think $50 shipped a couple years ago.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by team-savage »</TD></TR><TR><TD CLASS="quote">i went to the shop and got my ecu pr3. so now i just need random parts. tell me if i need to add anything to my list
already have
hasport mounts/shift linkage
rad hoses
b16/lsd trans
Ecu
Need
Shifter stabalizer bushing (del sol vtec)
DA non abs axles
coolant
oil/filter
DA throttle cable
mtf
5 16v wires (different colours)
new alt. belt (ditching a/c)
hopefully after this there wont' be to many unexpected expenses.
</TD></TR></TABLE>
make sure you get the correct driver side axle tyo mate with your intermediate shaft. (male - female)
Honda-Tech Member
Joined: Sep 2003
Posts: 9,235
Likes: 0
From: SC
Re: (HatchMo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo »</TD></TR><TR><TD CLASS="quote">chase where are the F'n pics!?</TD></TR></TABLE>
Joined: Oct 2006
Posts: 263
Likes: 0
From: Edmonton, alberta, Edmonton
i got my engine and tranny with the axles still on the tranny but they are cut in half. so my plan is to pull out the axles ( or the what remains of them) and take them to partsource to make sure the splines match up.
Honda-Tech Member
Joined: Aug 2006
Posts: 2,246
Likes: 0
From: Right near the beach BOI, Ga
Re: (HatchMo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo »</TD></TR><TR><TD CLASS="quote">chase where are the F'n pics!?</TD></TR></TABLE>
Honda-Tech Member
Joined: Mar 2005
Posts: 6,176
Likes: 0
From: san jo
Re: (B16CRXT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16CRXT »</TD></TR><TR><TD CLASS="quote">More than you can afford pal. Honda. jk, I got mine from a guy in the Netherlands for I think $50 shipped a couple years ago.</TD></TR></TABLE>
whoa what a deal. i sold mine back in 02 for 350 + shipping
jk, I got mine from a guy in the Netherlands for I think $50 shipped a couple years ago.</TD></TR></TABLE>whoa what a deal. i sold mine back in 02 for 350 + shipping
Honda-Tech Member
Joined: Sep 2003
Posts: 9,235
Likes: 0
From: SC
Re: (408wdy)
holy crap! Mine needs to be reupholstered, but other than that, its mint. I have pleather fabric for it, just no foam or knowledge about leather upholstering...getting creaseless corners p0wn me.
Honda-Tech Member
Joined: Aug 2006
Posts: 2,246
Likes: 0
From: Right near the beach BOI, Ga
Re: (408wdy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy »</TD></TR><TR><TD CLASS="quote">
whoa what a deal. i sold mine back in 02 for 350 + shipping </TD></TR></TABLE>
I need to sell mine then. I got three of them laying around.
whoa what a deal. i sold mine back in 02 for 350 + shipping
</TD></TR></TABLE>I need to sell mine then. I got three of them laying around.
Honda-Tech Member
Joined: Aug 2006
Posts: 2,246
Likes: 0
From: Right near the beach BOI, Ga
Re: (1 Fly SI)
I had fun tearing up Rickys valve cover. I am trying to figure out what color to paint it.
A couple pics the other night with my shitty camera I don't know how to use.
A couple pics the other night with my shitty camera I don't know how to use.
Honda-Tech Member
Joined: Nov 2003
Posts: 3,740
Likes: 0
From: the windy city, GO SOX, USA
Re: (Boosted Chemist)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist »</TD></TR><TR><TD CLASS="quote">
Just cause i don't hold your hand doesnt make me less of an hardcore ef'r </TD></TR></TABLE>
please fool, you know you want to hold my hand...or my nuts! Nah but I'm just tryna find these before July. I'ver tried searching but I guess i wont find them anytime soon 
Just cause i don't hold your hand doesnt make me less of an hardcore ef'r </TD></TR></TABLE>
please fool, you know you want to hold my hand...or my nuts!
Nah but I'm just tryna find these before July. I'ver tried searching but I guess i wont find them anytime soon
Honda-Tech Member
Joined: Aug 2006
Posts: 2,246
Likes: 0
From: Right near the beach BOI, Ga
Re: (kylefakesi-r)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kylefakesi-r »</TD></TR><TR><TD CLASS="quote">konig villains
i miss mine </TD></TR></TABLE>
I've had these rims for like 5 1/2 years. I like them and I don't have to worry about messing them up. I also like how the 2000 si center caps fit. It throws alot of people off.
i miss mine
</TD></TR></TABLE>I've had these rims for like 5 1/2 years. I like them and I don't have to worry about messing them up. I also like how the 2000 si center caps fit. It throws alot of people off.
Honda-Tech Member
Joined: Jul 2003
Posts: 4,259
Likes: 0
From: Phoenix
Re: (1 Fly SI)
i got mine about 6 years ago or so, had them on my old daily driver da when i sold it. i sold the car to a friend's older brother and told him that once he bought wheels i wanted them back...they were not sold with the car. 5 years later they are still on the da and he denies that was ever part of the deal.
backstabbing thieving "friends"
backstabbing thieving "friends"