The Official EF Discussion Thread
Joined: Oct 2006
Posts: 263
Likes: 0
From: Edmonton, alberta, Edmonton
so i ordered my b16/LSD 5 months ago from a shop and they still dont' have it. everytime i call i ask how much longer and it's always one more week, one more week. so i'm gunna call one more time tomorrow and if they don't have it i think i'm going to ask for my money back. and get the engine and tranny from a place in calgary. sorry this doesn't have any tech just needed to vent.
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (1 Fly SI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1 Fly SI »</TD></TR><TR><TD CLASS="quote">Ricky, is this what people do to crx's in FL?
http://www.youtube.com/watch?v=BN4uSE5qGH4
</TD></TR></TABLE>
http://www.youtube.com/watch?v=BN4uSE5qGH4
</TD></TR></TABLE>
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (team-savage)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 »</TD></TR><TR><TD CLASS="quote">the explicit speed one looks like it may have good clearance. if not, just modify one like wes v did. there is a write up on it in the EF/CRX forum.
well, i just came back from 2 junkyards. i couldnt find a set of fenders in mint condition, they all had at least a dent, ding, scrape, and stuff. if that is fine, then i will get them for you. nothing too bad on a couple of them, other then they were mismatch years. i did find quite a bit of DA integras with the full knuckle (disc, shield, caliper, etc.) and porportioning valve (thing by passenger shock tower). i also did find a few complete Rear DA integra disc setups. hatches for the EF. i left before reading that, but i did find a few. i dont think they were really damaged. i found what looked to be an optional CRX armrest and was going to pick it up, but i opened it up and the hinge looked mickey moused (like they replaced the hinge with a cabinet hinge). i decided not to get it at the last minute. can any one post pics of it to make sure that is what i saw.</TD></TR></TABLE>
I'm going to look around a bit here first, then I might have you pick some up for me. I've got a friend that drives a delivery truck out to no where, he passes junk yards daily. I'm sure there are some out there some where.
well, i just came back from 2 junkyards. i couldnt find a set of fenders in mint condition, they all had at least a dent, ding, scrape, and stuff. if that is fine, then i will get them for you. nothing too bad on a couple of them, other then they were mismatch years. i did find quite a bit of DA integras with the full knuckle (disc, shield, caliper, etc.) and porportioning valve (thing by passenger shock tower). i also did find a few complete Rear DA integra disc setups. hatches for the EF. i left before reading that, but i did find a few. i dont think they were really damaged. i found what looked to be an optional CRX armrest and was going to pick it up, but i opened it up and the hinge looked mickey moused (like they replaced the hinge with a cabinet hinge). i decided not to get it at the last minute. can any one post pics of it to make sure that is what i saw.</TD></TR></TABLE>
I'm going to look around a bit here first, then I might have you pick some up for me. I've got a friend that drives a delivery truck out to no where, he passes junk yards daily. I'm sure there are some out there some where.
Honda-Tech Member
Joined: Feb 2003
Posts: 5,297
Likes: 0
From: I love the east coast, OH
Honda-Tech Member
Joined: Apr 2005
Posts: 829
Likes: 0
From: phoenix, arizona, 602
Re: (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">I hope Ryan doesn't mind, but I figured you guys would like to see this...
</TD></TR></TABLE>
damn k20, 5 lug , power folding mirrors
</TD></TR></TABLE> damn k20, 5 lug , power folding mirrors
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (h22egAZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">What will they charge you for the fenders, like $35 each?</TD></TR></TABLE>
probably. i joined the mailing list. they do have half off weekends sometimes
probably. i joined the mailing list. they do have half off weekends sometimes
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (vega_box)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box »</TD></TR><TR><TD CLASS="quote">iiitttssss bbaaaaacccckkkk!!!!1</TD></TR></TABLE>your swap is fully completed? or the new look completed?
oh yeah, my girlfriend just bought me 2 pairs of the Polk Audio DB650s for my CRX for my birthday. does anyone know if the replica jdm bass tubes fit well and help sound quality (add some slight bass)?
oh yeah, my girlfriend just bought me 2 pairs of the Polk Audio DB650s for my CRX for my birthday.
does anyone know if the replica jdm bass tubes fit well and help sound quality (add some slight bass)?
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (Smokinsax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax »</TD></TR><TR><TD CLASS="quote">vega...your hammers look wierd
</TD></TR></TABLE>must be overspray
Honda-Tech Member
Joined: Mar 2005
Posts: 6,176
Likes: 0
From: san jo
Re: (gospeedgo1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 »</TD></TR><TR><TD CLASS="quote">
must be overspray </TD></TR></TABLE>
ahahahahhahahha
must be overspray
</TD></TR></TABLE>ahahahahhahahha