The Official EF Discussion Thread
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (CBEengineering)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">thanks
replacing that MYSPACE pic with a pic of my *** with the same URL, lol</TD></TR></TABLE>
That brace looks nice. I'm thinking about getting the ASR when it comes out. Then I'm going to have my brother copy it at work, then I'll sell it.
replacing that MYSPACE pic with a pic of my *** with the same URL, lol</TD></TR></TABLE>
That brace looks nice. I'm thinking about getting the ASR when it comes out. Then I'm going to have my brother copy it at work, then I'll sell it.
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: (-NA-aLL-thE-wAy-)
I have heard it was going to be too much for anything on the screet
here is a better pic of me.....this is what I usually look like......if you get a pic of me at all...I have killed everyone else that has taken a pic of me....except that crack ***** that took the one above...I let her live
BTW my shirt is ST green
here is a better pic of me.....this is what I usually look like......if you get a pic of me at all...I have killed everyone else that has taken a pic of me....except that crack ***** that took the one above...I let her live
BTW my shirt is ST green
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (CBEengineering)
I don't let anyone take pics of me either, except if it's with my daughter, just because I want her to have them for later.
Do I need to take my doors off? I just dread lining them back up. I think I can do a pretty thourough job of painting with them on.
Do I need to take my doors off? I just dread lining them back up. I think I can do a pretty thourough job of painting with them on.
Honda-Tech Member
Joined: Sep 2003
Posts: 9,235
Likes: 0
From: SC
Re: (HatchBox)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchBox »</TD></TR><TR><TD CLASS="quote">
JDM Power folding mirrors for a 90-91 hatch.
Complete Relay/swtich/ 100% working/wired. Could use a paint job. But could also put on as is.
</TD></TR></TABLE>
will those mirrors fit properly on my 91 rex? The power folding mirrors are something I've always wanted for my car. And power windows...
JDM Power folding mirrors for a 90-91 hatch.
Complete Relay/swtich/ 100% working/wired. Could use a paint job. But could also put on as is.
</TD></TR></TABLE>will those mirrors fit properly on my 91 rex? The power folding mirrors are something I've always wanted for my car. And power windows...
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (-NA-aLL-thE-wAy-)
those teddy bear wheels are awesome. i showed my gf them and she really liked them. what size do they come in? we could put some on her jetta or my crx. i wonder how much they run for.
Skoobie no more...
Joined: Jun 2002
Posts: 5,832
Likes: 1
From: Va Beach
Re: (B16CRXT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16CRXT »</TD></TR><TR><TD CLASS="quote">
will those mirrors fit properly on my 91 rex? The power folding mirrors are something I've always wanted for my car. And power windows...</TD></TR></TABLE>
I beleive the slope of the door is different by a few degrees, But dont quote me. Im not 100% sure
will those mirrors fit properly on my 91 rex? The power folding mirrors are something I've always wanted for my car. And power windows...</TD></TR></TABLE>
I beleive the slope of the door is different by a few degrees, But dont quote me. Im not 100% sure
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (gospeedgo1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 »</TD></TR><TR><TD CLASS="quote">those teddy bear wheels are awesome. i showed my gf them and she really liked them. what size do they come in? we could put some on her jetta or my crx. i wonder how much they run for.</TD></TR></TABLE>
I think they are pretty pricey.
I think they are pretty pricey.
Honda-Tech Member
Joined: Sep 2003
Posts: 9,235
Likes: 0
From: SC
Re: (HatchBox)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchBox »</TD></TR><TR><TD CLASS="quote">
I beleive the slope of the door is different by a few degrees, But dont quote me. Im not 100% sure</TD></TR></TABLE>
I think so too,but I can't remember.
I cant beleive you guys seriously like those wheels.
On a lighter note. That chick is lookin good.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
I beleive the slope of the door is different by a few degrees, But dont quote me. Im not 100% sure</TD></TR></TABLE>
I think so too,but I can't remember.
I cant beleive you guys seriously like those wheels.
On a lighter note. That chick is lookin good.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
Honda-Tech Member
Joined: Jun 2002
Posts: 3,281
Likes: 0
From: Los Angeles, CA, USA
Re: (vega_box)
EDIT: Awesome pageownage!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box »</TD></TR><TR><TD CLASS="quote">i donnu about that one. One a CRX bumper right??
someone did EG fogs on there bumper that seemed to fit almost perfectly but the EK fogs shape is different then the EF fogs and mounting is different too</TD></TR></TABLE>
Yeah on a CRX, but instead of using the fake inlets on the left and right, I would mount the 97 squares on both sides of the large center inlet. It looks to about the same size and shape as the EK center inlet.
This would allow me to cut open the right and left vents and use them for brake cooling and CAI flow. With ducting of course.
Modified by RSZero1 at 9:25 PM 4/17/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box »</TD></TR><TR><TD CLASS="quote">i donnu about that one. One a CRX bumper right??
someone did EG fogs on there bumper that seemed to fit almost perfectly but the EK fogs shape is different then the EF fogs and mounting is different too</TD></TR></TABLE>
Yeah on a CRX, but instead of using the fake inlets on the left and right, I would mount the 97 squares on both sides of the large center inlet. It looks to about the same size and shape as the EK center inlet.
This would allow me to cut open the right and left vents and use them for brake cooling and CAI flow. With ducting of course.
Modified by RSZero1 at 9:25 PM 4/17/2007
Female 
Senior Member
Joined: Dec 2004
Posts: 10,137
Likes: 0
From: EMAIL ME at Chase@ChaseBaysOnline.com
Re: (MOE@Hyper16Valve)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy »</TD></TR><TR><TD CLASS="quote">you dont have to flare it.
</TD></TR></TABLE>
Nice, another person using my writeup, good to see
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">thanks chase</TD></TR></TABLE>
for what?
</TD></TR></TABLE>Nice, another person using my writeup, good to see
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">thanks chase</TD></TR></TABLE>
for what?
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (vega_box)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box »</TD></TR><TR><TD CLASS="quote">the Ronal Teddy bears only came in 14"</TD></TR></TABLE>
your are wrong about that...
they also came in 13"
your are wrong about that...
they also came in 13"
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (gospeedgo1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 »</TD></TR><TR><TD CLASS="quote">those teddy bear wheels are awesome. i wonder how much they run for.</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">I think they are pretty pricey.</TD></TR></TABLE>
less than $600, new in box.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">I think they are pretty pricey.</TD></TR></TABLE>
less than $600, new in box.
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (HatchMo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">less than $600, new in box. </TD></TR></TABLE>
really........... interesting
really........... interesting