fiddynut, you need to post more pics of that girl and the digital display

 

I got an EF seat rail here at my house. What do you need me to measure?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thenick &raquo;</TD></TR><TR><TD CLASS="quote">I got an EF seat rail here at my house. What do you need me to measure?</TD></TR></TABLE>


how far the holes are aprt from one another. Plus I need to see the bottom of the seat to see if it looks the same as the Recaro at the bottom

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 &raquo;</TD></TR><TR><TD CLASS="quote">cool, too bad not the lights im looking for.
what do you guys think of a midori green crx as compared to a barbados yellow crx?

</TD></TR></TABLE>


definitely the CRX FTW, and i like hatchs more its just the color for me.


Midori looks amazing on EF's

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box &raquo;</TD></TR><TR><TD CLASS="quote">

I have no idea. Best bit is take out your passenger seat, take the seat pans off and take pictures for me and measure it. Then I can see if the rails would bolt up or if you would have to weld them on there.
But just a shot in the dark...you'll probably have to weld</TD></TR></TABLE>

honestly, rather than spending money on new rails, i would take the seats out and investigate the mounting brackets. It is prolly cheaper to take the seats to a confident welder and just have him cut and weld for 50$

 

 

Last one butt the best one.

 

James I'll get you those measurements as soon as I find some measuring tape BTW, does anyone know where I can get eyelids/eyebrows for my Civic. And if anyones gonna say something stupid I suggest you put yourself in a blender and turn the button on.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax &raquo;</TD></TR><TR><TD CLASS="quote">
im still trying to figure out wth this means...</TD></TR></TABLE>
i was replying to synergy10, he had some lights, but not the year i need.

if the nrg bolt spacing is different from the recaro ones, then you may need to make brackets. i took some photos of the nrg seat in my car and my mini rims too. give me a lil and i will post them

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thenick &raquo;</TD></TR><TR><TD CLASS="quote">James I'll get you those measurements as soon as I find some measuring tape BTW, does anyone know where I can get eyelids/eyebrows for my Civic. And if anyones gonna say something stupid I suggest you put yourself in a blender and turn the button on. </TD></TR></TABLE>
you mean the vinyl that goes on the headlight or the metal that they add to the hood to make it a boser hood (like the mk4 vws)? im guessing you can get the vinyl stuff at any good decal shop.

heres the pics




i would like to get the mini wheels powdercoated gun metal, or even silver. there is a midori hatch that has the mini wheels too, but im pretty sure i had mine on first. the previous owner painted the wheels black and silver

 

keep in mind, my seat is reclined one or two notches more back then what i normally sit at.

 

I DEFINITELY don't need to be sitting that high. I just need my *** and legs to be like an inch lower and I'll be set =/

 

 

^^ Boner Jams '03

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thenick &raquo;</TD></TR><TR><TD CLASS="quote">I DEFINITELY don't need to be sitting that high. I just need my *** and legs to be like an inch lower and I'll be set =/</TD></TR></TABLE>
im 6'1" with a long torso so my head hits the roof. im using the stock rails with homemade brackets. it sits at the same height as the stock si seat IMO. the seat definitely helps on the windy mountain roads. im not sure if how much lower you can really get. the stock rails are about 1 inch thick

 

I kinda made my own mounts for my sparco. I used the stock sliders and put flat aluminum bars between them and bolted the seat to it. I'm not sure if it would pass race inspection, but it's at least as strong as oem. I'll try to get a pic. It mounts the seat low though

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fiddynut &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>

This is bitchin. Is this custom?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicandy &raquo;</TD></TR><TR><TD CLASS="quote">I kinda made my own mounts for my sparco. I used the stock sliders and put flat aluminum bars between them and bolted the seat to it. I'm not sure if it would pass race inspection, but it's at least as strong as oem. I'll try to get a pic. It mounts the seat low though</TD></TR></TABLE>
thats basically what i did. hmm, what sparco seat was used?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 &raquo;</TD></TR><TR><TD CLASS="quote">
heres the pics
</TD></TR></TABLE>

What brand seat is that? They look exactly like the ones I have for sale (actually selling for a friend). He doesn't know what brand they are either???

 

they look like jdmcarboy seats?

 

mine is done the same way and has passed Cal speedway tech for street legals and NASA events in 04 seat sits low

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicandy &raquo;</TD></TR><TR><TD CLASS="quote">

This is bitchin. Is this custom? </TD></TR></TABLE>
Its just a pic I found. By the look of the scope its sitting on I would say yes.

 

they are the same ones that jdm carboy has. they were made by NRG. they have served me well except that they faded, but i also had them when i was in so cal, damn desert sun with no tint didnt help. the website is nrg.com

 

 

here i have to post this up. gotta match my car you know. bumble bee FTW!!!