<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostedb20EH2 &raquo;</TD></TR><TR><TD CLASS="quote">
What are you doing btw?</TD></TR></TABLE>

boosted z6
vitaras,tt rods,arp bolts,td04 turbo,hf mani 15psi

 

What are you shooting for?

 

CHARLIE JEFF AND DAN, YOU GUYS OWE ME AND PHIL MONEY. YOU GUYS AGREED TO PAY ON EVERY 15th. BUT WHERES MY PAYMENT? JUST GET IT TO ME I DONT NEED THIS. YOU GUYS GOT TILL THE END OF THE MONTH TO PAY ME VIA PAYPAL @ ydshindo@yahoo.com

 

for those who can make it on sunday let me know!

https://honda-tech.com/zerothread?id=1916651

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RATED EG &raquo;</TD></TR><TR><TD CLASS="quote">CHARLIE JEFF AND DAN, YOU GUYS OWE ME AND PHIL MONEY. YOU GUYS AGREED TO PAY ON EVERY 15th. BUT WHERES MY PAYMENT? JUST GET IT TO ME I DONT NEED THIS. YOU GUYS GOT TILL THE END OF THE MONTH TO PAY ME VIA PAYPAL @ ydshindo@yahoo.com</TD></TR></TABLE>I'm just waitibg for the money to clear.....I had to re verfi my acount..........I tried to get ahold of you but you never or reply when I'm asleep......your money from me is on the way!<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nautical_Star &raquo;</TD></TR><TR><TD CLASS="quote">First I'm gonna dyno/tune it and if I like the numbers I'm gonna go get some slick's and see what I can pull.

Also loving my new mintass ITR seats(usdm). </TD></TR></TABLE> I wouldn't run slick your first time at the track......esp with a motor that makes no tq at all. Just go on street tires and have fun. All I got to do is fix my clutch isses and ill be back to see what the gsr can pull on the azeines. Charile my only advice is try the street tires and go from there.......I bogged bad at the track.....when on the street I would spin. I ended up launching at 5500rpms and pulled a 1.8 60 ft and then no more gears to go into..........I say first time just find some dr. Do some passes on the advans tires then throw the drs on.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nautical_Star &raquo;</TD></TR><TR><TD CLASS="quote">

First I'm gonna dyno/tune it and if I like the numbers I'm gonna go get some slick's and see what I can pull.

Also loving my new mintass ITR seats(usdm). </TD></TR></TABLE>

charlie u got the itr seats finally a good pair of seats in your car...your interior wont look too junky now...but then that means i can get your gsr leather right....my car might be gone saturday saturday saturday...well hopefully...cross my fingers hope to die...haha and ill be picking up my brand new ek next week... gyea and i got alot of parts sitting in my garage waiting for the ek...

 

here's my POS

 

Is that real Equips?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nautical_Star &raquo;</TD></TR><TR><TD CLASS="quote">Is that real Equips?</TD></TR></TABLE>
nope

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cuz_ican &raquo;</TD></TR><TR><TD CLASS="quote">nope</TD></TR></TABLE>

x2. Equips have a stepped lip. I seen those for sale on the vw forums. look good though

 

**** still looks nice.

 

What are they synergy? I have a friend wanting to know like crazy. I saw pics of your car on another site and it's eating him up. I thought they were Equip 03's.

 

they are Axis Old Skool wheels. the specs are 15x8 +25 offset. i was going to get the work equip wheels but i didnt want to spend $$$$ to find out that i got the wrong deep dish offset.




Modified by Synergy001 at 4:03 AM 3/23/2007

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Synergy001 &raquo;</TD></TR><TR><TD CLASS="quote">they are Axis Old Skool wheels. the specs are 15x8 +25 offset. i was going to get the work equip wheels but i didnt want to spend $$$$ to find out that i got the wrong deep dish offset. </TD></TR></TABLE>

So where you going for looks or functioin. tech &gt; looks

 

I'll be picking up a 1992 Honda Civic Si this summer so I can get my act back together. The plan is to swap the motor with a K20A2 that I'll be getting for about $2000 (complete swap) from an 2004 RSX Type-S

Get ready for my 10 EH

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earthworm Jim &raquo;</TD></TR><TR><TD CLASS="quote">

So where you going for looks or functioin. tech &gt; looks </TD></TR></TABLE>

both......havent you seen that one old car commercial?....WIDER IS BETTER!! LOL...J/K!! another factor i decided to go with the Axis wheels instead is that i had an extra inch of contact on the road since they are 15x8. it feels like i hug the ground more with these wheels compared to the 7" width wheels i'm used to running. my car is somewhat low and i do not have any problems with rubbing whatsoever. i had more problems rubbing with the stock '02 civic steelies with stock tires at the same height.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earthworm Jim &raquo;</TD></TR><TR><TD CLASS="quote">I'll be picking up a 1992 Honda Civic Si this summer so I can get my act back together. The plan is to swap the motor with a K20A2 that I'll be getting for about $2000 (complete swap) from an 2004 RSX Type-S

Get ready for my 10 EH </TD></TR></TABLE>

thats a damn good deal. keep us posted

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Synergy001 &raquo;</TD></TR><TR><TD CLASS="quote">

both......havent you seen that one old car commercial?....WIDER IS BETTER!! LOL...J/K!! another factor i decided to go with the Axis wheels instead is that i had an extra inch of contact on the road since they are 15x8. it feels like i hug the ground more with these wheels compared to the 7" width wheels i'm used to running. my car is somewhat low and i do not have any problems with rubbing whatsoever. i had more problems rubbing with the stock '02 civic steelies with stock tires at the same height. </TD></TR></TABLE>

7.5 is much better...I know you said that you didn't want to spend the money but it's all about the outcome. Volk CE28's 15X7.5 8.3lbs $1300 Not as wide but twice as light

 

CHARLIE WHERES YOUR PAYMENT AT?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RATED EG &raquo;</TD></TR><TR><TD CLASS="quote">CHARLIE WHERES YOUR PAYMENT AT?</TD></TR></TABLE>

Uh oh.....someone's mad boss

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earthworm Jim &raquo;</TD></TR><TR><TD CLASS="quote">

7.5 is much better...I know you said that you didn't want to spend the money but it's all about the outcome. Volk CE28's 15X7.5 8.3lbs $1300 Not as wide but twice as light </TD></TR></TABLE>

that's a good price on the volks too i'd rather use the extra money to spend on go fast goodies or my house mortgage. there are cheaper ways for weight reduction

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Synergy001 &raquo;</TD></TR><TR><TD CLASS="quote">

that's a good price on the volks too i'd rather use the extra money to spend on go fast goodies or my house mortgage. there are cheaper ways for weight reduction </TD></TR></TABLE>

Did you have to roll your fenders? (I know know nothing about rims but bolt patterns and sizes.)

 

im not mad i just think its starting to be fucked up that he agreed to pay and everytime i ask him on here or on the site he doesnt say ****

 

Up from my phone!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RATED EG &raquo;</TD></TR><TR><TD CLASS="quote">im not mad i just think its starting to be fucked up that he agreed to pay and everytime i ask him on here or on the site he doesnt say ****</TD></TR></TABLE>

Wtf? You didn't get my payment? I sent like $18(somewhere around there) damn near two weeks ago.