jcarothers

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cranberry &raquo;</TD></TR><TR><TD CLASS="quote">they had some failers like any company does when they firs come out. so its all good. btw you better be ready for modding my car with me soon!!!!!!!!!!1</TD></TR></TABLE>
I figured that.. but like what part(s) failed?

I'm ready bitch, get some mods already! and real ones too, not any of that cosmetic bullshit anymore!

edit: my page!

cranberry

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jcarothers &raquo;</TD></TR><TR><TD CLASS="quote">
that tells me two things, there's enough space to run a taller tire on the 16's or the 17's will rub.
once again, there are more choices to run in tire size than what everone else runs.

a 205/45/16 is 23.3" tall, a 195/45/17 is 23.9" tall... .6 of an inch will not do much to save your lip kit.. though, I would hope the tires for the 17's are wider so heights will differ if that isn't the correct width.. it's a step down IMO to go from a 205 to a 195 width.</TD></TR></TABLE>
i second that!

Earthworm Jim

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jcarothers &raquo;</TD></TR><TR><TD CLASS="quote">that tells me two things, there's enough space to run a taller tire on the 16's or the 17's will rub.
once again, there are more choices to run in tire size than what everone else runs.

a 205/45/16 is 23.3" tall, a 195/45/17 is 23.9" tall... .6 of an inch will not do much to save your lip kit.. though, I would hope the tires for the 17's are wider so heights will differ if that isn't the correct width.. it's a step down IMO to go from a 205 to a 195 width.</TD></TR></TABLE>

I need every bit I can get. I could run 50's on the 16's (I think) but that seriously looks gay as all get out. Let's remeber, other than the lip there's the K20's aluminum oil pan

jcarothers

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earthworm Jim &raquo;</TD></TR><TR><TD CLASS="quote">

I need every bit I can get. I could run 50's on the 16's (I think) but that seriously looks gay as all get out. Let's remeber, other than the lip there's the K20's aluminum oil pan </TD></TR></TABLE>
205/50/15 is typical on a 92-95 hatch.. on a 16" wheel a 205/50 would look thinner than the 15" counter part but still have the same amount of tire around the wheel to keep it safe.. so I dno't see how that can be gay as all '...' since it'd look very normal(infact it'd look similar overall, since a 205/50/15 is about the same height as the 205/45/16.. that 205/45/16 would look better on an older hatch with smaller wheel wells but the rsx and ep civics have larger wheel wells) .
also of that .6" difference I mentioned earlier.. it would only raise the body of your car about .3" further from the ground. .3" does nothing for clearance of that lip and that pan... if you really don't want to hurt the lip and the pan, maybe you should think about not being as slammed. I'm just warning you about hurting some very expensive wheels, the bigger the wheel the shorter the sidewall.. the shorter the sidewall the more liekly to bend a wheel.

Daishi

Most work I've done to my car in the last couple months, .. waxing it.



Been a busy summer. Moved out, new job, lots of freelance photography and graphic design, parents in another country, house sitting, no time to work or spend money on the car.

I did order some parts and am about to order PIC coilovers, ASR subframe and an ITR 23mm sway bar. Should be fun.

Nautical_Star

^^^Look's good.

SjCiViCHB

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earthworm Jim &raquo;</TD></TR><TR><TD CLASS="quote">I need every bit I can get. I could run 50's on the 16's (I think) but that seriously looks gay as all get out. Let's remeber, other than the lip there's the K20's aluminum oil pan </TD></TR></TABLE>


you wouldn't be able to get the ep low enough get the oil pan, unless you get like that phaze2 ep...

FreshEG6!*

i like how no one added their names to the list..

DjGuamstyles

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Daishi &raquo;</TD></TR><TR><TD CLASS="quote">
I did order some parts and am about to order PIC coilovers, ASR subframe and an ITR 23mm sway bar. Should be fun.</TD></TR></TABLE>

Hey would you be interested in a Beaks subframe reinforcement rear swaybar kit? I sold my EG, and I still have this in my garage. Its brand new, never been used. There are other brands out there now, that are probably a little better, like the comptech one where the lower tiebar bolts to the bracket along with the reinforcement, but this is better than not having one at all! I'll give it to you for $50 shipped...want it? Oh and btw hello fellow EH squad members...haha. Lookout for a for sale thread pretty soon...I got some good stuff. mud flaps with hardware, and instructions for you boneheads, a GSR exhaust, an ITR exhaust, a practically brand new B16 water pump, a brand new CF duckbill, perfect fit, and small weave like Spoon, and debating on selling my brand new IDB (in da box duh!) OEM EG front lip. Still not sure if I wanna sell it yet...

Nautical_Star

How much for the ITR exhaust?

Braco11

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FreshEG6!* &raquo;</TD></TR><TR><TD CLASS="quote">i like how no one added their names to the list.. </TD></TR></TABLE>

it's cuz most people who post already have their names on it.

anyway, i'm off to sleep. gotta get up early for work. i'll talk to all you guys (and gals) tomorrow.

FreshEG6!*

bump cause i pulled my hamstring in game 1 of soccer and had to play on it for game 2 and game 3.. but it's killing.. and the pain won't go away...

gotone4ya

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cranberry &raquo;</TD></TR><TR><TD CLASS="quote">ok guys i just came up with this wonderful idea....everyone add there real name to there username on this list right here, ill add what i can remember.
1. naticalstar-charlie
2. cranberry-jeff
3. ratedeg-yoshi
4. civicon14inbrws-steve
5. Earthworm Jim-glore
6. LivE-SporkHB-alex
7. cuz_ican-daniel
8. hybrid92b20(still gets to hold 27 as well)-danny
9. EG6AAARRR!!!-micha
10. jdm_oz-Oz
11. Slaughter
12. JA_EH94
13. BaNAnABoAt689
14. HA.R.T B18C1EG6
15. Strawb3rri3-jen
16. Tad
17. EG6-R
18. 96ls-mike
19. Johnny'EH2
20. Hatch-E
21. SjCiViCHB-beaver
22. ECKO1980
23. DxHatchback
24. GotHaTcH
25. GreyEG6
26. h22dreams
27. hybrid92b20
28. h22dreams
29. jap_eg6
30. hondaboy4life
31. EH-3-abe
32. Daishi
33. Alloutmotorsports-harley
34. Jcarothers-james
35. Dinko
36. Lalo
37. CGags13
38. 93SiVtec677-dave
39.Rubiks-ruben
40.Braco11-gus
41. E gee six
42.shyboi4u-
43. Slammed92hbonN20
44. FreshEG6!*-Stephanie-the second lady of the squad.
45. Mr. HYDE
46. Rabbitz-brian-aka carrot top
47. DSRxNATE-nate
48. EG6 PSI
49. The Pest
50. S0beP0wer
51. hialeahzbg
52. 92-eg6
53. Viorent Grip! EG
54. .Michael.
55. teknikEG6
56. sikciv666-newbie
57. American.Graffiti-newbie
58. street_racer_NC- Jaison
59. mackeg6 -newbie
60. 92'BluV-tecHatch-newbie
61. Topdawgg-newbie
62. spoon95eg-nebie
63. My EH AinT JDM-newbiw </TD></TR></TABLE>

Earthworm Jim

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jcarothers &raquo;</TD></TR><TR><TD CLASS="quote">
205/50/15 is typical on a 92-95 hatch.. on a 16" wheel a 205/50 would look thinner than the 15" counter part but still have the same amount of tire around the wheel to keep it safe.. so I dno't see how that can be gay as all '...' since it'd look very normal(infact it'd look similar overall, since a 205/50/15 is about the same height as the 205/45/16.. that 205/45/16 would look better on an older hatch with smaller wheel wells but the rsx and ep civics have larger wheel wells) .
also of that .6" difference I mentioned earlier.. it would only raise the body of your car about .3" further from the ground. .3" does nothing for clearance of that lip and that pan... if you really don't want to hurt the lip and the pan, maybe you should think about not being as slammed. I'm just warning you about hurting some very expensive wheels, the bigger the wheel the shorter the sidewall.. the shorter the sidewall the more liekly to bend a wheel.
</TD></TR></TABLE>

I understand the reasoning. There (as I said before) are more pro's to me getting a larger wheel size. If my car raises off of the ground .3" then that's higher than it would have been sitting which is a good thing. Believe me, ever little bit matters, Jeff could see the result of my other car being too low. Had the SOHC's had oil pans like the K20's I would have never sold the car. For the simple fact is that there were somethings that on a normal basis I would have clear (like this mini but hill...thing we have on base) that really isn't that high off the ground but ever fraction of an inch matters in the long run. I've seen EPs with 16 and the homosexuality behind them is very large IMHO I'm calling the shop in Japan this morning, they guy might not be able to change my order, we'll see though.


Modified by Earthworm Jim at 10:51 AM 8/17/2006

FreshEG6!*

boo cause my mom's dog ran away yesterday and she's out of town..

Earthworm Jim

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FreshEG6!* &raquo;</TD></TR><TR><TD CLASS="quote">boo cause my mom's dog ran away yesterday and she's out of town.. </TD></TR></TABLE>

so are you going to get into trouble or what? I mean, the dog did runaway, it's not like you let it go.

American.Graffiti

iTrader: (7)

Stray dogs dont last long around here. But, on a lighter note well im also considering some tein basics with a blox all around camber kit.

FreshEG6!*

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earthworm Jim &raquo;</TD></TR><TR><TD CLASS="quote"> so are you going to get into trouble or what? I mean, the dog did runaway, it's not like you let it go.</TD></TR></TABLE>

no i'm not gonna get in trouble...but it's partly my fault cause i didn't close the side gate right....both dogs took off but one came back...the other didn't...

Braco11

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FreshEG6!* &raquo;</TD></TR><TR><TD CLASS="quote">

no i'm not gonna get in trouble...but it's partly my fault cause i didn't close the side gate right....both dogs took off but one came back...the other didn't...</TD></TR></TABLE>

same thing happened to me on the day of the meet. while i was working on the hatch, i left the gate open. my dog took off. luckily, we found him two days later at the pound.....for the second time this year.

cranberry

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by American.Graffiti &raquo;</TD></TR><TR><TD CLASS="quote">Stray dogs dont last long around here. But, on a lighter note well im also considering some tein basics with a blox all around camber kit.</TD></TR></TABLE> dont buy the basics....waste of money.

Earthworm Jim

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by American.Graffiti &raquo;</TD></TR><TR><TD CLASS="quote">Stray dogs dont last long around here. But, on a lighter note well im also considering some tein basics with a blox all around camber kit.</TD></TR></TABLE>

Integra spring rated Tein SS's and Skunk2 and you're set

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FreshEG6!* &raquo;</TD></TR><TR><TD CLASS="quote">

no i'm not gonna get in trouble...but it's partly my fault cause i didn't close the side gate right....both dogs took off but one came back...the other didn't...</TD></TR></TABLE>

Hmm, upon further research it sounds like it was your fault j/k

FreshEG6!*

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Braco11 &raquo;</TD></TR><TR><TD CLASS="quote">same thing happened to me on the day of the meet. while i was working on the hatch, i left the gate open. my dog took off. luckily, we found him two days later at the pound.....for the second time this year. </TD></TR></TABLE>

yeah i'm hoping the pound picks him up...

Earthworm Jim

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FreshEG6!* &raquo;</TD></TR><TR><TD CLASS="quote">

yeah i'm hoping the pound picks him up...</TD></TR></TABLE>

Does the dog have a chip in it's neck? Those help out a lot (from what I've heard).

SjCiViCHB

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FreshEG6!* &raquo;</TD></TR><TR><TD CLASS="quote">

no i'm not gonna get in trouble...but it's partly my fault cause i didn't close the side gate right....both dogs took off but one came back...the other didn't...</TD></TR></TABLE>

daang...i would've got my *** handed to me if i left the gate open.

FreshEG6!*

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Earthworm Jim &raquo;</TD></TR><TR><TD CLASS="quote">Does the dog have a chip in it's neck? Those help out a lot (from what I've heard).</TD></TR></TABLE>

nope we got the dog like 9 years ago..so it wasn't an option to get it...and we never did end up getting one..only my cat has the chip..<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SjCiViCHB &raquo;</TD></TR><TR><TD CLASS="quote">daang...i would've got my *** handed to me if i left the gate open.</TD></TR></TABLE>

i didn't leave it like wide open...i locked it but the little stick thing didn't go in the whole in the ground and i totally forgot..so the big dog like pushed the gate open...lame..