I seen that valve cover on FB. Who posted it again?

 

SpecialKay posted it on my wall.

 

Banner go to gabes Facebook and add me! Kevin Gaxiola

 

Vc is fuggin hilarious!

 

I need one like that!

 

Florida, yeah buddy!

 

Buttonwillow tomorrow! woop woop

 

Nice info for sure. Is dish soap safe though?
What are you doing there?

 

if your trying to clean off wax then yes. if you dont want wax off then dont use dish soap. he wants to clay bar his car, it will make it easier in the sense that he wont also be going thru as much wax. theres nothing like a freshly clayed car. smooth as a piece of nice ***.

 

getting closer to completion









called the shop and they have yet to start working on my manifold ...so i told em to hold off....i may be going with something a bit sexier

here is the rough rendering i sent to a buddy who is going to be making me a sexy time rhmt style manifold...and i only took about 15 sec to draw this so its not all that great

 

Whats up dudes? I miss my hatch =( or should i say i miss owning a hatch.

 

Nice! A forward facing setup! I wanted to run a forward facing setup like that but I was going to have to get a new intercooler and change up a bunch of ish, I just stuck with the run-o-the-mill topmount.

 

jesse!!!!!!!!!!!!! i know what you mean sometimes, but after watching the movie love the beast the sedan has become my beast and i cant stop with it now.

 

well it just all kinda fell in place...it will be all mild steel and have shitty looking but hella strong welds so im good with it...also twin scroll so it should actually spool faster than my ramhorn

i wanted a topmount originally but front mount is way more badass...lol

yeah im thinking of picking up and ebay intercooler its got a 18x12x3 core iirc, have it modded to a back door on the the passenger side and reweld the radiator tabs over 3" so all i will have is a 90* off the throttle body then strait down into the intercooler, and a new downpipe made up...

the best part is i should be able to sell off my current set-up to cover the entire cost

 

Hell ya! Keep us updated with pics. I like pics.

 

as always...im a pic ***** myself...lol...still it'll be 2-3 weeks out

 

Wheels for the CR-V just came in!
15x7 +0 offset Cragar soft 8's!
YES +0 for mad tite jdm herrafrush fitmint!!!




Sike.... Fock that.


I should be getting these mounted on my lunch break. Will update accordingly.

 

i saw it on facebook it must be real.

 

http://www.youtube.com/watch?v=22l1sf5JZD0
see i can dig stuff like this.

 

So I had weighed myself on a bad scale lol. Turns out I'm really 163 and not 177 haha woot!

 

i use to cut 20lbs to weigh that my sr year in high school.

 

Got the first phase done on the CR-V last night. It rubs a little bit at almost full lock but once I fab up the spacers for the struts they will clear.

Im debating on either making a 2.25" spacer for the rear and a 2" spacer in the front OR getting the 35mm Ironman lift springs and then making a 1.5" strut spacer for the rear and a 1.25" strut spacer for the front.

The springs and the spacers together will give me a 2.75" overall lift. The reason I am not really wanting to just lift it using strut spacers is because the rig will have alot more body roll since the OEM springs have about 2 inches of sag.

Anywayz, here you go!

 

Nice my old jeep was fun in the mud.

 

Holy off road tires, good for trips to the mall.

I am finally back from vacation, I needed more time. It was a blast, the little girl had a great time flying. My back resembles a lobster.

 

Welcome back Beej!