I've never seen one for sale.... If someone made a replica that was just as nice I'd rock it.

I punched mine out no problem with a mini sledge. Just hit left, right, left, right, left, right, left until it wiggled its way out and just popped out. Putting it back in was a lot tougher and if you have access to a press or can take them somewhere that has a press that is your best bet. I'll be replacing the ones in my new Integra arms this week without a press just to see if I can do it....

It has different positions to angle the "spoiler" part. It just attaches to an OEM spoiler.

 

I purchased a press a long time ago...it's come in handy since I've done it a few different times on friends cars and lent it out as well.


However...if you're lucky enough to hammer it out...here is a diy video:
[youtube]hPTDzrxqoOo[/youtube]

 

That's the video I saw before I hammered mine out. It literally took me 10 seconds to get mine to pop out... Being from the lower midwest where we don't get much snow and cars aren't exposed to salt on the roads really seems to help. Took about 5 minutes of careful tapping to get them back in though.

 

Finally got the integra disc brake swap done, get the wheel on and its cambered out like crazy on the passenger side. Turns out the spindle is bent, **** has been a total nightmare.

 

NICE VIDEO! Thx

 

 

Looks good. Which wheels are you going with? I hope its higher than at that height when you get them! Thats just too low haha

 

man thats shiney looks good

 

The same thing happened to me.... The first one I got was bent outward with positive camber, the second one I got was bent the opposite direction way worse so I looked all hellaflush gangsta lean -15 degrees of camber and then finally the last one I got was straight. Was probably the worst care experience I've ever had.....

 

Anyone have a DC Integra brake booster they want to let go for cheap? I got a 15/16 MC from a buddy and just need an integra booster to run with it.

The bolt pattern is opposite of Civic....

 

Nice, Massa Cylindah...mount it upside down. = )

 

My asian friend gave it to me. I kind of like how it looks just sitting on the desk in my office too!

 

I'm sure you know I'm a fan of White TE37s! I love my cars slammed. Lol. But I pretty much sold my white hatch and bought this. I was looking for a Captiva SI so bad. I ended up not getting a Captiva, nor a SI. But its RHD, I'm happy ...for now.

 

Oh, I have BNIB CF BYS Lip forsale also! I pretty much paid $600 on JHPUSA and waited 4 months for shipping. Im asking $500 picked up or $530 Shipped. Never been mounted, ever. PM for pics!

 

This car reminds me of Rok_Stok's

 

if you wanted to run a 15/16, you might as well just buy a 91 4 door ex mc and just use your stock booster, might be cheap than buying a booster to use the integra one, just saying

 

That's kinda what I'm thinking... Boosters cost double what a MC does.

 

@drew I sent you a little something on facebook.

@WhiteSlips are you replacing the whole rear arm?

 

Yeah. My stock trailing arm bushings are bad and the compensator arms and upper arms are pretty rough, so I'm switching it all out at the same time.

 

Honestly I think I would have gave up. I got the stock brakes back on the front... I dont think I'll try my luck again. Isn't there a bigger brake swap you can do that uses the stock civic spindle? I finally got my car back on the road today and I was driving it to my girls house and I was like damn I dont remember it riding this rough, then I remembered it has those ES trailing arm bushings ha.


That EPB? hatch is AWESOME.

 

I think when I paid for mines it was like around 80 bucks from autozone.

 

puurrdy blue

 

Black is better

 

nice paint

 

Captiva > All. (: