B16DelSlo

which yakima rack did u use?

Type_R_Nammer

hatcher23

iTrader: (1)

will take some soon

94WhYt_EG1

it was an integra one but i had to use different clips and cut them up and redrill the holes and stuff...it was a pain in the *** but well worth it..

96DelSol

Just waiting for my Type-R lip to arrive.

Dirty Octopus

heck.. you should buy my whole front end! :D

SolSXR

It's ABS. i'm not a fan of urethane as much anymore due to it getting soft in high heat. Plus the ABS can take a bunch of abuse and show little damage.

IMO

whyHonduh

wat year del sol wuld u reccommend

jasongilholme

hey mate,

thanks for the kind words. I think we like each others cars cause we have a fetish for white del sols :p

Yeah white chassis is the go i think. when i pull the car apart again i'm going to do it even better. I want to shave the interior a bit if possible to make it even smoother and a nice new coat of paint across the whole car would be good. At the moment she's frost white but championship white is on the cards ! YAY!

Yeah i went blue tint cause it is a higher UV rating and in australia its definately something i need hehe. I had to swap all my parts over to the new one. I'm keeping my eyes peeled for a damaged roof so i can set my white one up with the latches so i can have the glass one on the car and the other one in the boot. I think that would be cool. Not great for weight but it would be cool to say "my car has two roofs on it yO!" haha.

Your white one flew off?!!! are you serious?? no way! ur jokin right?

honda_racing101

Are you kidding? Because ABS just cracks with the slightest scrape/bump. I find poly to be much more giving.

gots_a_sol

Did they own up to it at least or take off like a little bitch?

yESSSmAn

just got this today but im out of town for another week...i just wanna get home to get this on to see how it looks...awwwwwwwwwwhhhhh

mugen-k

iTrader: (1)

someone with a sol already has one of those blue asr braces on
got one when they first came out...

I'll try and find a pic

ITR sway bar too

trustdestruction

Well the creaking dash is the same problem i'm having, I haven't tried to fix it. I don't really want to pull the dash. Perhaps if you tighten the bolts holding the dash in it will go away. I might have to try that.

Describe the noise that occurs with the A/C


I have a driver door noise too... a rattling noise. The other day I finally figured it out, after taking the panel off around 10 times and securing everything in the door. Turns out that the grommet in the door panel where the screw under the handle (not the handle that opens the door) bolts into to secure the door panel is worn out and the screw won't tighten fully... I have new grommets coming on the way for this location on each door panel.

yESSSmAn

IF YOU COULD FIND THAT PIC THAT WOULD BE GREAT

b16_sol_707

Solattack77 has one of the blue ASR braces. I went with him to pick it up from weaksauce.

del_sol_gurl

well i haven't been here in a while so alot of things has happened....ill be back on track soon but here is a pic of my car..

Eran

iTrader: (1)

Wow, nothing on that car fits. Sorry.

The mouldings are installed wrong, the lip has HUGE glaring gaps....

del_sol_gurl

the lip has what? no its the position of the camera lip has no gaps... the rear ones or the front i think i put the rears crooked...but that tape is a bitch to take out...other than that thanks for the comments....

Eran

iTrader: (1)

You used an EK lip. There's like a 4 inch gap on either side.

And the bumper moulding are just purely mounted in the WRONG spots. They come with instructions, you should have followed them. They're supposed to be down further and back further towards the wheels. Basically, they start where the reflectors used to be.

del_sol_gurl

actually thats an Jun eg lip...im gonna take a pic from top and u'll see theres no gap other than scratches ... and scratches
the instructions were followed which i still have the front were taken out like 3 times cuz the bumper was painted after it got hit..ill take a look another day when i have the strenght to take those off...the rears OHH i know those bitches are crooked and ill fix them later....but thanks for pointing it out..its good to see some pay attention to detail...lip is gonna be a gonner soon have a new one in the mail

Eran

iTrader: (1)

Eww, they make a JUN copy for EG's? It didn't even EXIST for EG's.

del_sol_gurl

yeah i got this lip from i friend that came from cali where he got it...it was free so i was ok...he has an eg6

http://www.streetstyler.com/LipPics/CF/CIVJUN.gif

honda_racing101

Ana I'm digging the wheels. What happened to the BBS's though? Damn you've done so much to your car since last year and mine is essentially the same (

Looking forward to IA again!

92eg6

iTrader: (1)

couple minor things i been stashing.