DA Integra's Only
Sweet Title
Joined: Feb 2006
Posts: 3,966
Likes: 0
From: Bay Area, CA
Re: (theSYNDICATE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by theSYNDICATE »</TD></TR><TR><TD CLASS="quote">His sn is tegboi 
</TD></TR></TABLE>
I think it's ultra tegboi
</TD></TR></TABLE>I think it's ultra tegboi
Honda-Tech Member
Joined: Jan 2007
Posts: 313
Likes: 0
From: the land of, 10,000 lakes
Re: (sixfiveoh)
does anyone wana buy my WingsWest-RS kit?? I bought it for 700.00 a while back but never got around to it and have no plans...its unpainted, still in box sittin in the garage...PM me w/offers and -???-
...and the reason to why i bought the kit is that white DA
Honda-Tech Member
Joined: Feb 2004
Posts: 2,017
Likes: 1
Re: (sixfiveoh)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sixfiveoh »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
Thats ******* awesome!
Anyone know what the cup holder set up is?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stillrockin18s »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
These are awesome too. What all did you do? Did you sand the insides down to make them more clear? I've seen the black housing mod done but never this. I want info!
</TD></TR></TABLE>Thats ******* awesome!
Anyone know what the cup holder set up is?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stillrockin18s »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>These are awesome too.
What all did you do? Did you sand the insides down to make them more clear? I've seen the black housing mod done but never this. I want info!
Honda-Tech Member
Joined: Jul 2004
Posts: 4,860
Likes: 0
From: Hill town, TN, USA
Re: (Coke in a Can)
Now I need a clutch so im droppin the tranny...
Did the swap, but I havent ever done a clutch job.
its still in the car also...
Following the haynes manual...
First question....
How do i remove the VSS (Vehicle Speed sensor)
Without removing the hoses etc.....
I pulled the VSS line out but I need the assembly out of the tranny....
Thanks!
Honda-Tech Member
Joined: Jan 2006
Posts: 1,384
Likes: 0
From: CA to OR to CA
Re: (Coke in a Can)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Coke in a Can »</TD></TR><TR><TD CLASS="quote">anyone looking to buy JDM DA window visors, brand spanking new. 200+shipping.</TD></TR></TABLE>what about help installing them
Honda-Tech Member
Joined: Apr 2003
Posts: 157
Likes: 0
From: Louisville, KY, USA
Re: (Coke in a Can)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Coke in a Can »</TD></TR><TR><TD CLASS="quote">anyone looking to buy JDM DA window visors, brand spanking new. 200+shipping.</TD></TR></TABLE>
why the hell are those things so freakin expensive???
why the hell are those things so freakin expensive???
Re: (1uncleanDA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1uncleanDA »</TD></TR><TR><TD CLASS="quote">what about help installing them</TD></TR></TABLE>
if you purchase the visors i can install them for like 30 bucks or something...
if you purchase the visors i can install them for like 30 bucks or something...
Re: (itsHumble)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itsHumble »</TD></TR><TR><TD CLASS="quote">
why the hell are those things so freakin expensive???</TD></TR></TABLE>
they are a lot harder to obtain the ek/dc/eg/dc5/ep3/cl9 window visors.
they are also a lot longer. longer visor+hard to get = more money.
but they are worth every penny IMO.
why the hell are those things so freakin expensive???</TD></TR></TABLE>
they are a lot harder to obtain the ek/dc/eg/dc5/ep3/cl9 window visors.
they are also a lot longer. longer visor+hard to get = more money.
but they are worth every penny IMO.
Honda-Tech Member
Joined: Feb 2003
Posts: 1,413
Likes: 0
Re: (Jose-aka-Pedro)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jose-aka-Pedro »</TD></TR><TR><TD CLASS="quote">
Now I need a clutch so im droppin the tranny...
Did the swap, but I havent ever done a clutch job.
its still in the car also...
Following the haynes manual...
First question....
How do i remove the VSS (Vehicle Speed sensor)
Without removing the hoses etc.....
I pulled the VSS line out but I need the assembly out of the tranny....
Thanks!</TD></TR></TABLE>
I think you're refering to the PS lines for the speed sensitive PS control in the speedo cable housing. THey should just slide off with a little coaxing from a set of needle nose pliers. As for the speedo cable itself, it's held in place by a small brass c-clip. Then you can leave the housing on the trans when removing it. Either that or remove the single 10mm bolt holding the housing to the trans. Hope this helped ever so slightly.
Now I need a clutch so im droppin the tranny...
Did the swap, but I havent ever done a clutch job.
its still in the car also...
Following the haynes manual...
First question....
How do i remove the VSS (Vehicle Speed sensor)
Without removing the hoses etc.....
I pulled the VSS line out but I need the assembly out of the tranny....
Thanks!</TD></TR></TABLE>
I think you're refering to the PS lines for the speed sensitive PS control in the speedo cable housing. THey should just slide off with a little coaxing from a set of needle nose pliers. As for the speedo cable itself, it's held in place by a small brass c-clip. Then you can leave the housing on the trans when removing it. Either that or remove the single 10mm bolt holding the housing to the trans. Hope this helped ever so slightly.
Honda-Tech Member
Joined: Sep 2002
Posts: 9,978
Likes: 0
From: Scooby Snacks, ca, usa
Re: (Coke in a Can)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Coke in a Can »</TD></TR><TR><TD CLASS="quote">
they are a lot harder to obtain the ek/dc/eg/dc5/ep3/cl9 window visors.
they are also a lot longer. longer visor+hard to get = more money.
but they are worth every penny IMO. </TD></TR></TABLE>so true
they are a lot harder to obtain the ek/dc/eg/dc5/ep3/cl9 window visors.
they are also a lot longer. longer visor+hard to get = more money.
but they are worth every penny IMO.
</TD></TR></TABLE>so true
Junior Member
Joined: Mar 2006
Posts: 276
Likes: 0
From: THREEoneSEVEN, IN, U.S.A.
Re: (CaptivaBlueTeg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CaptivaBlueTeg »</TD></TR><TR><TD CLASS="quote">
This is what I used for the Avatar.
I photoshoped it the color of my car
This is the full one of the avatar for my car, The front lip still kinda looks funny to me but i'll work on it when I have the time. It's basically what I want my car to look like by the summer
</TD></TR></TABLE>
very nice but where did you get the pics from. like what website has those cartoon car pictures ?
This is what I used for the Avatar.
I photoshoped it the color of my car
This is the full one of the avatar for my car, The front lip still kinda looks funny to me but i'll work on it when I have the time. It's basically what I want my car to look like by the summer
</TD></TR></TABLE>very nice but where did you get the pics from. like what website has those cartoon car pictures ?
Honda-Tech Member
Joined: May 2004
Posts: 1,643
Likes: 0
From: Swervin to miss road apples, PA, USA
Re: (Coke in a Can)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Coke in a Can »</TD></TR><TR><TD CLASS="quote">they are a lot harder to obtain the ek/dc/eg/dc5/ep3/cl9 window visors.
they are also a lot longer. longer visor+hard to get = more money.
but they are worth every penny IMO. </TD></TR></TABLE>
i think its a waste of money. I could buy 10 hookers for that price
they are also a lot longer. longer visor+hard to get = more money.
but they are worth every penny IMO.
</TD></TR></TABLE>i think its a waste of money. I could buy 10 hookers for that price
Sweet Title
Joined: Feb 2006
Posts: 3,966
Likes: 0
From: Bay Area, CA
Re: (hybrid1990crx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrid1990crx »</TD></TR><TR><TD CLASS="quote">
Thats ******* awesome!
Anyone know what the cup holder set up is?</TD></TR></TABLE>
It's from an Oddessy
Thats ******* awesome!
Anyone know what the cup holder set up is?</TD></TR></TABLE>
It's from an Oddessy
Honda-Tech Member
Joined: Aug 2004
Posts: 7,137
Likes: 0
Re: (iSRT_Vtec)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iSRT_Vtec »</TD></TR><TR><TD CLASS="quote">
i think its a waste of money. I could buy 10 hookers for that price</TD></TR></TABLE>
damn your getting owned
i can get 15
Honda-Tech Member
Joined: Jun 2004
Posts: 5,431
Likes: 0
From: Los GANJALES
Re: (bokals)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bokals »</TD></TR><TR><TD CLASS="quote">damn your getting owned
i can get 15 </TD></TR></TABLE>
hahah...
i can get 15
</TD></TR></TABLE>hahah...
Honda-Tech Member
Joined: Jun 2005
Posts: 600
Likes: 0
From: .
Re: (Jose-aka-Pedro)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jose-aka-Pedro »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
nice photoshop but u missed some spots with the fadin
BUMP FOR MORE!
</TD></TR></TABLE>nice photoshop but u missed some spots with the fadin
BUMP FOR MORE!
Member
Joined: Aug 2006
Posts: 1,175
Likes: 0
From: V A double L E J O
Re: (92DA Teg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92DA Teg »</TD></TR><TR><TD CLASS="quote">hella i like the way you painted the car, very unique. i've seen black roofs and carbon hoods and trunks but not all the way down. very nice IMO. </TD></TR></TABLE>
muchos gracias brutha
</TD></TR></TABLE>muchos gracias brutha
Honda-Tech Member
Joined: Jul 2004
Posts: 401
Likes: 0
From: Olathe, ks, USA
I just got a vis CF hood for our anniversary, I would really like to stay away from hood pins, do you guys think I need them? I've never had a CF hood before. I have a brand new latch from after the accident.
Re: (sixfiveoh)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sixfiveoh »</TD></TR><TR><TD CLASS="quote">
It's from an Oddessy </TD></TR></TABLE>
i thuoght it was from a CR-V?
It's from an Oddessy </TD></TR></TABLE>
i thuoght it was from a CR-V?