~DA SQUAD Version 2.0~
Honda-Tech Member
Joined: Dec 2006
Posts: 164
Likes: 0
From: Rainy, WA
I know. I have dc sides and i'm starting to get sick of seeing them everywhere. lol I'm finding something different and never telling anyone. lol Same with the front lip that's on my teg. I have a set of EK sides to but i don't like the flair at the end
Honda-Tech Member
Joined: Dec 2006
Posts: 164
Likes: 0
From: Rainy, WA
haha yeah there you go, or you can just get some super rare parts?! I dont like the flare at the end of the EK sides either, it just looks kind of funny on a DA.
Junior Member
Joined: Nov 2008
Posts: 48
Likes: 0
From: New Jersey
I hear ya on that dude. I'm workin on getting a better suspension before I go any lower. Jersey ain't the best place to be going all the way to the ground. Especially when I set up my own shocks with some crap lowering springs. My ride needs some shocking attention
Junior Member
Joined: Nov 2008
Posts: 55
Likes: 0
From: DALLAS TX
Honda-Tech Member
Joined: Mar 2006
Posts: 1,135
Likes: 0
From: IN MY ROOM
TURBO GURU'S; Is this setup worth it?
turbo setup for a b17a1.................
ok so i found this turbo set up on ebay
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
what do you guys think about it? good deal or not? for 1300
so far i have a stock b17a1 motor with 2.5. striaght pipe and some spoon cam gears...
im planning on boosting about 6 - 8 psi. so what else would i need besides injector, i was thinking about 270-310 cc, boost gauge, arp head studs and a bov. i was also thinking about picking up a emange system. any thing else?
thanks
turbo setup for a b17a1.................
ok so i found this turbo set up on ebay
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
what do you guys think about it? good deal or not? for 1300
so far i have a stock b17a1 motor with 2.5. striaght pipe and some spoon cam gears...
im planning on boosting about 6 - 8 psi. so what else would i need besides injector, i was thinking about 270-310 cc, boost gauge, arp head studs and a bov. i was also thinking about picking up a emange system. any thing else?
thanks
Junior Member
Joined: Feb 2008
Posts: 475
Likes: 0
From: burien, wa, usa
Dude Kuppa thanks a lot bro! and um Im taking the bumper off Im painting the bumper and putting the lights on at one time so no more taking off the bumper :thumbsup: AHH I can't wait! Then a CF hood comin in a lil later! And yo Kuppa is there access to the fog light, to put a H3 in there? or do u have to drill a hole?
and as far as paint in warm conditions after base coat apply clear after about 15-25 min of cure tim so the 2 coats will bond DO NOT WAIT 24 hrs or the 2 coats wont stick to each other correctly
Junior Member
Joined: Feb 2008
Posts: 475
Likes: 0
From: burien, wa, usa
Reject Pimp
Joined: Jan 2008
Posts: 1,795
Likes: 0
From: U.S.
They come with bulbs in them but replace them they will burn out fast but if you want yellow fog cover like i have you will have to drill just look up my thread on G2ic.com
and as far as paint in warm conditions after base coat apply clear after about 15-25 min of cure tim so the 2 coats will bond DO NOT WAIT 24 hrs or the 2 coats wont stick to each other correctly
and as far as paint in warm conditions after base coat apply clear after about 15-25 min of cure tim so the 2 coats will bond DO NOT WAIT 24 hrs or the 2 coats wont stick to each other correctly
Junior Member
Joined: Feb 2008
Posts: 475
Likes: 0
From: burien, wa, usa
Honda-Tech Member
Joined: Mar 2007
Posts: 260
Likes: 1
From: Northern, VA, USA
sorry guys, but its time to sell my 92. Greddy catback, AEM CAI, skunk2, tokico's, and a fluidyne rad.
if you want more info PM me..i cant figure out how to post in FS in the marketplace..
EAST COAST only, no shipping. $4800 cash obo. lots of new/replacement parts
PM me!
if you want more info PM me..i cant figure out how to post in FS in the marketplace..
EAST COAST only, no shipping. $4800 cash obo. lots of new/replacement parts
PM me!
Last edited by fatfurious2; Dec 5, 2008 at 05:29 AM. Reason: changing market place location
Junior Member
Joined: Feb 2008
Posts: 475
Likes: 0
From: burien, wa, usa
Nnnnnnnnnnoooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooo
Honda-Tech Member
Joined: Apr 2008
Posts: 8,958
Likes: 0
From: In The Sticks, PA, America
TURBO GURU'S; Is this setup worth it?
turbo setup for a b17a1.................
ok so i found this turbo set up on ebay
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
what do you guys think about it? good deal or not? for 1300
so far i have a stock b17a1 motor with 2.5. striaght pipe and some spoon cam gears...
im planning on boosting about 6 - 8 psi. so what else would i need besides injector, i was thinking about 270-310 cc, boost gauge, arp head studs and a bov. i was also thinking about picking up a emange system. any thing else?
thanks
turbo setup for a b17a1.................
ok so i found this turbo set up on ebay
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
what do you guys think about it? good deal or not? for 1300
so far i have a stock b17a1 motor with 2.5. striaght pipe and some spoon cam gears...
im planning on boosting about 6 - 8 psi. so what else would i need besides injector, i was thinking about 270-310 cc, boost gauge, arp head studs and a bov. i was also thinking about picking up a emange system. any thing else?
thanks
2. WHYYYYYYYYYYYYYYYYYY do you want to boost a b17?!?!? please dont!! rare motor! keep it all motor or at least pull it out and keep it in storage for safe keeping or something. not tryin to tell you want to by any means, but man, i wouldnt boost a b17. buuut, if you insist...build you own kit instead of buying an ebay special. if you do it right and catch the right deals you can spend the same or less money and have better quality parts. if you need help with that, i could help ya out...
