Group Threads Club, Large Multi-Region Group, "Squad" Discussions

~DA SQUAD Version 2.0~

Thread Tools
 
Search this Thread
 
Old Mar 3, 2008 | 08:03 AM
  #476  
LoseRPunKx182's Avatar
Honda-Tech Member
 
Joined: Aug 2004
Posts: 3,382
Likes: 1
From: UT
Default Re: (91redteg)

innovative does.
Reply
Old Mar 3, 2008 | 09:22 AM
  #477  
projectstacy's Avatar
 
Joined: Jan 2006
Posts: 230
Likes: 0
From: edinburg, tx, usa
Default

bumpity bump
Reply
Old Mar 3, 2008 | 10:11 AM
  #478  
DA9_DAD's Avatar
Senior Member
iTrader: (4)
 
Joined: Dec 2004
Posts: 2,536
Likes: 0
From: Diamond Bar, Ca.
Default Re: (ex1z7)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ex1z7 &raquo;</TD></TR><TR><TD CLASS="quote">Well my car sounds fucked.. Anyone have any idea's I'd LOVE to hear them.. Heres the sitch..

'90, b18a, 5spd, 193,000 km's, act stage II clutch and lightened flywheel - intake/full exhaust, that's about it. If it matters.

Car turns over, cranks, and dies immediately. It bursts to 900-1000 rpm, then dies. Sometimes I can catch it and rev it to about 1500 and it dies anyways.

I tried push starting it, but it was so icey I couldn't get it moving enough.. I had it started when I stuck it in first and popped the clutch and floored it hard when it was moving forward a bit, and it ran fine for a half hour till it stalled at the gas station - where CAA came and picked me up to go to a garage.

No fucking idea.. Anyone? No gauge lights saying it's in trouble - but when I start it, it dies, and I try again etc. I can hear something (sounds like flywheel) slowing down.. could also be starter, I havn't heard it before but my exhaust is so damn loud I don't think I'd be able to if the car was running.

God this is such a **** off.. I was about to fix everything cosmetic cus it was running so damn good..

Awesome. </TD></TR></TABLE>


I'm guessing the following.

#1 - bad dizzy.

#2 - fuel pick-up issues may definitely be a problem, too.

#3 - Battery

Have you done anything at all with the motor recently???

keep it in neutral for one....the tranny shouldn't have anything to do with it starting and idling.
Reply
Old Mar 3, 2008 | 11:38 AM
  #479  
ex1z7's Avatar
Junior Member
 
Joined: Feb 2007
Posts: 520
Likes: 0
From: Thunder Bay, Ontario, Canada
Default

91, da9..

I just heard back from my garage an hour ago, turns out it's the solenoid behind my key - like when you turn the key and it completes the circuit and starts the car.. Mine doesn't.

$100 part, $150 in labour.

I figured it was distributor, but when it does start it runs fine..

And I also thought fuel, but again when it starts it's fine and idles normal and sounds normal..

And my battery has a solid charge - my lights come on, my stereo plays, everything works the way it should..

I'll keep you guys updated.. Man this is the first time I've let anyone else touch my DA..

nervous
Reply
Old Mar 3, 2008 | 11:41 AM
  #480  
ex1z7's Avatar
Junior Member
 
Joined: Feb 2007
Posts: 520
Likes: 0
From: Thunder Bay, Ontario, Canada
Default

On another note, when I got my car stuck in the snow yesterday I noticed that my door handle is now magically fixed. It wasn't springing back so I had to push the handle closed from the outside so the door actually /closed/

It now springs fine.

Huh.. explain that one too..
Reply
Old Mar 3, 2008 | 11:45 AM
  #481  
joshpwc's Avatar
Honda-Tech Member
 
Joined: Sep 2007
Posts: 5
Likes: 0
From: Dallas, Tx, US
Default

Hey guys, I don't post much, just read and learn. I thought I'd post here cause I have two DA's. My white one has a blown b18 bone stock and sits outside my house, and my black one has a 97 b20b, with a blown head gasket. In my garage I have megan headers (meh), new rad, obx hoses, and a skunk2 IM. I'm looking around the area for a B20Z, I found some and just looking for the best price. I can't decide whether to do it myself, or get it installed with some sort of shop warranty. When I take out the old b20b I want to get it up on my stand and eventually put it in my white teg. I have money I just don't want to put a ton into it unless I know its gonna work, and I think a 2000 motor in there will be the trick. I guess I'm just looking for tips and advice.
Reply
Old Mar 3, 2008 | 04:13 PM
  #482  
italionstallion888's Avatar
Honda-Tech Member
 
Joined: Jul 2004
Posts: 401
Likes: 0
From: Olathe, ks, USA
Default

Choung who is the owner of Revline here in KC said he'd post up a dyno and more pics of the baby eater turbo set up for you guys....already ate a 4k tranny
Reply
Old Mar 3, 2008 | 04:32 PM
  #483  
jdmDAlove's Avatar
 
Joined: Jan 2008
Posts: 31
Likes: 0
From: fredericksburg, ca
Default Re: (clean3two3)

yea i put my three pieces back in and i love them way more
Reply
Old Mar 3, 2008 | 06:27 PM
  #484  
binshou's Avatar
Junior Member
 
Joined: Feb 2008
Posts: 12
Likes: 0
From: san antonio, tx, us
Default Re: (projectstacy)

hey nice da's ive seen on here. what does it take to be on the "squad" mine the blue one with the fogs...
Reply
Old Mar 3, 2008 | 07:00 PM
  #485  
JDM-Punk's Avatar
Honda-Tech Member
 
Joined: Jun 2005
Posts: 3,846
Likes: 0
From: NO, VA
Default

looks clean from what i can see of, anymore pics?
Reply
Old Mar 3, 2008 | 07:19 PM
  #486  
meotch's Avatar
 
Joined: Jun 2004
Posts: 283
Likes: 0
From: Windsor/ Calgary, On/AB, Canada
Default Re: (JDM-Punk)

well... here it is.. just in this thread

cheers

msf.

Reply
Old Mar 3, 2008 | 07:24 PM
  #487  
stocker2shocker91's Avatar
I requested a short story for a title.
 
Joined: Jul 2005
Posts: 1,707
Likes: 0
From: hard parked at the sandbar
Default Re: (deceptakhan)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by deceptakhan &raquo;</TD></TR><TR><TD CLASS="quote">SO I'm off the list? Can I reapply and bump to member 420 since you are down in the 300s?

http://www.myspace.com/mydb2 yeah, myspace is gay, but anywho





</TD></TR></TABLE>

this thing is pretty i have been lookin for a G2 gsr are for so long and still have not found one that is callin my name. the either have a almost 300,000 miles or are about 7g's guess i might just have to buck up
Reply
Old Mar 3, 2008 | 07:26 PM
  #488  
meotch's Avatar
 
Joined: Jun 2004
Posts: 283
Likes: 0
From: Windsor/ Calgary, On/AB, Canada
Default Re: (meotch)

I guess a few more


some fitting

b16a2

Reply
Old Mar 3, 2008 | 09:03 PM
  #489  
clean3two3's Avatar
Honda-Tech Member
 
Joined: Sep 2007
Posts: 1,019
Likes: 0
From: So.Cal, Ca, United States
Default Re: (jdmDAlove)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmDAlove &raquo;</TD></TR><TR><TD CLASS="quote">yea i put my three pieces back in and i love them way more</TD></TR></TABLE>

question you know your lights when they are on can you see all these shapes and lines or is it just mine and they dont shine too far either
Reply
Old Mar 3, 2008 | 10:30 PM
  #490  
LoseRPunKx182's Avatar
Honda-Tech Member
 
Joined: Aug 2004
Posts: 3,382
Likes: 1
From: UT
Default Re: (ex1z7)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ex1z7 &raquo;</TD></TR><TR><TD CLASS="quote">On another note, when I got my car stuck in the snow yesterday I noticed that my door handle is now magically fixed. It wasn't springing back so I had to push the handle closed from the outside so the door actually /closed/

It now springs fine.

Huh.. explain that one too.. </TD></TR></TABLE>

with the age of these cars sometimes when a problem resolves itself its already a good day
Reply
Old Mar 3, 2008 | 10:38 PM
  #491  
kilo_da9's Avatar
Junior Member
 
Joined: Mar 2007
Posts: 227
Likes: 0
From: Upper SD to the I.E. So cAL
Default Re: (ex1z7)

ex1z7:
sounds like the infamous main relay check this
http://g2ic.com/forums/showthread.php?t=55129
Reply
Old Mar 3, 2008 | 10:43 PM
  #492  
kilo_da9's Avatar
Junior Member
 
Joined: Mar 2007
Posts: 227
Likes: 0
From: Upper SD to the I.E. So cAL
Default

on another note
EIBACH meet tickets now on sale!!! come on guys lets represent the DA Squad
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stunna BEN &raquo;</TD></TR><TR><TD CLASS="quote">UPDATE 3-3-08

DATE: MAY 18th WILL be the date. That is a sunday, like we always do.

I look foward to seeing each and every one of you out there.

Yup its that time again. We are ready to roll out the red carpet to all of the honda-tech.com members to come out and join us for a fun filled day at Eibach of North America. Only a step out of LA, Corona will play host to this event at the Eibach headquarters and like every year past we are looking foward to seeing you all bring out the hottest cars to the biggest "HONDA ONLY" meet in the world.

This is a forum meet, not a show, thrown my Vtecvoodoo, Rodrez, and myself, along with help from many companies in the industry inlcuding Hasport, Sportcar Motion, and many more. You Dont want to miss out on this event.

Please copy the MOST CURRENT list, and add your name. please try to give me as acurate of a number as you can. No crew's, i need induvidual screen names. If they are not on honda tech, add + and a number for how many are coming with you. This all will come into play when we are selling tickets.

THINGS TO REMEMBER BEFORE YOU PURCHASE=
Also, there are some things i need to add...

1. if people want to park as a group we ask you to pay as a group. If you do, we need to get each persons FULL NAME.

2. everybody that registers by themselves needs to include their full name.

SPOTS*****************
Vip Parking $20
Regular Parking $10


3. we only have about 100 VIP $20 spots and they will sell out quick. These spots are for the cream of the crop, so please use your judgement on these folks. the other spots are just as good, but these spots are for the "fire"

THE PAYPAL ADDRESS=
<FONT SIZE="6">rhoegner@eibach.com is the addy!</FONT>

Needs to have your FULL name, along with anyone elses FULL name as well, along with YOUR EMAIL ADDRESS


WHEN YOU GET TO EIBACH=
when you come to the entrance, we will have your 1 free raffle ticket avaible too, along with your names to be checked off on list as entered. Then, we will park you all accordingly.

VENDORS=
Vendors are first come first serve. We only have room for about 10 more
Vendor Info-
10x10 = $250
10x20 = $350
-These include the sparking space for 2 cars


RAFFLE TICKETS=
Raffle Tickets on sale today as well. -Everybody who pays for parking gets one
-5 for $10
-10 for $18
-20 for $32
-50 for $60
-100 for $100


ALso, it will be a little late, but we also will be calling this a bash for our very own Vtecvoodoo who has another little one coming into the world! Come out and celebrate with us!!!!

I will start the list... FOR THE MOST CURRENT LIST, GOTO THE LAST PAGE AND LOOK AT THE LAST POST PLEASE

1. Stunna BEN
2. Vtecvoodoo
3. Rodrez


Modified by Stunna BEN at 5:27 PM 3/3/2008</TD></TR></TABLE>
Reply
Old Mar 3, 2008 | 10:44 PM
  #493  
dumada9's Avatar
Junior Member
 
Joined: Jun 2007
Posts: 744
Likes: 0
From: San Jose, CA, us
Default

clean3two3 i have the same problem with my lights, i still dont know what it is, could be that its dirty on the inside maybe? it has to be something on the bulb or the actual light itself thats causing it
Reply
Old Mar 4, 2008 | 02:33 AM
  #494  
vdawg559's Avatar
Junior Member
 
Joined: May 2007
Posts: 353
Likes: 0
From: frsno, ca, usa
Default

hey da squad. need some help i have a 92 rs. an was wondering. how low is the front of u guyz car. cus i wanna slam the front. but den the oil pan gonna be to low. here are some pics. i have adjustble coil over. oh yeah. dont mind the dam black trunk and tail lights. im tryna put it back to stock... but you cant beat 1300 clean title tho. lol

Reply
Old Mar 4, 2008 | 03:40 AM
  #495  
Ricextacy's Avatar
Honda-Tech Member
 
Joined: Oct 2007
Posts: 850
Likes: 0
From: San Jose, CA, USA
Default Re: (vdawg559)

yo vdawg, my friend wants to buy your car. lookin for a 5spd Clean DA. hit meup with the info. Ricextacy@yahoo.com
Reply
Old Mar 4, 2008 | 10:18 AM
  #496  
g2gs's Avatar
Junior Member
 
Joined: Sep 2005
Posts: 665
Likes: 0
From: some where in the midwest, N.D., U.S.A.
Default

are we gonna get an update with new members?
Reply
Old Mar 4, 2008 | 10:54 AM
  #497  
91redteg's Avatar
Honda-Tech Member
 
Joined: Jan 2007
Posts: 3,549
Likes: 0
From: trbho, WA, united states
Default Re: (g2gs)

just ordered a complete set of mounts from hasport. including a cable to hydro tranny conversion steppin the game up son
Reply
Old Mar 4, 2008 | 11:42 AM
  #498  
projectstacy's Avatar
 
Joined: Jan 2006
Posts: 230
Likes: 0
From: edinburg, tx, usa
Default Re: (g2gs)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g2gs &raquo;</TD></TR><TR><TD CLASS="quote">are we gonna get an update with new members?</TD></TR></TABLE>

word
Reply
Old Mar 4, 2008 | 03:33 PM
  #499  
Ramon64124's Avatar
Honda-Tech Member
 
Joined: Dec 2007
Posts: 18
Likes: 0
From: Kansas City, MO, US Of A
Default Re: (projectstacy)

New DA Squad member here, from Kansas City...
Reply
Old Mar 4, 2008 | 04:24 PM
  #500  
JDM-Punk's Avatar
Honda-Tech Member
 
Joined: Jun 2005
Posts: 3,846
Likes: 0
From: NO, VA
Default Re: (g2gs)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g2gs &raquo;</TD></TR><TR><TD CLASS="quote">are we gonna get an update with new members?</TD></TR></TABLE>

yea integra1.8L has been slacking, since i got back from vacation
Reply



All times are GMT -8. The time now is 12:04 PM.