.Ej8 yaahh

well.. got done spraying the inside and trunk of the coupe.. It is no longer gonna be black... ClubRacer... Your coupe is still my fav. black Ej8..

marc-111

iTrader: (1)

hello guys!

.Beaver

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 01_CLtypeS &raquo;</TD></TR><TR><TD CLASS="quote">
CAT forklifts FTW </TD></TR></TABLE>

That thing looks tiny. We have 3 5k pound Toyotas and a 10k pound Yale at my work.

01_CLtypeS

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Beaver &raquo;</TD></TR><TR><TD CLASS="quote">

That thing looks tiny. We have 3 5k pound Toyotas and a 10k pound Yale at my work. </TD></TR></TABLE>


we have 8 5k CATs at my work and a 10K CAT...they call the 10K bertha! haha

they have nissan motors tho

.Beaver

Are Cats reliable? Our Toyotas are junk, they all have 9-10k hours and are just falling apart and run like ****. Kind of hard to run a shipping & receiving dept when the forklifts break down weekly.

br0nx finest

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AnotherEJ &raquo;</TD></TR><TR><TD CLASS="quote">

Hey man how is your Grandmother doing? Did she get any better?

Looks so sick Clubracer I have been waiting for a good bigger picture of your car to use as a new background.</TD></TR></TABLE>
she passed homie, was buried LAST saturday.

i'm satisfied knowing she's in a better place.

EJ8 944

i has a cat

.Beaver

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by br0nx finest &raquo;</TD></TR><TR><TD CLASS="quote">
she passed homie, was buried LAST saturday.

i'm satisfied knowing she's in a better place.</TD></TR></TABLE>

Sorry to hear, RIP

97ekb18b

**** ok so today i went to install my blox lcas and i broke a bolt, the one closest to the rear drum, it snapped offat the head so i thought it would be ok to drive i took it for a drive and the wheel is leaning!!!!!! so i jacked it back up and put it were it needed to be and temp welded the hole with the stud, how can i get the broken bolt out!!!!!!!!

.Ej8 yaahh

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Beaver &raquo;</TD></TR><TR><TD CLASS="quote">

Sorry to hear, RIP </TD></TR></TABLE>

x2. Sorry to hear that man, like you said. Shes in a better place.

I_Love_My_EJ8

okay, i got a question. how can u tell the difference between a sir-g b18c and a type r spec? i hear its the manifold obviously but what else? because i found a "type r" b18c for a good price and i dont want to get rolled.

I_is_NINJA

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97ekb18b &raquo;</TD></TR><TR><TD CLASS="quote">**** ok so today i went to install my blox lcas and i broke a bolt, the one closest to the rear drum, it snapped offat the head so i thought it would be ok to drive i took it for a drive and the wheel is leaning!!!!!! so i jacked it back up and put it were it needed to be and temp welded the hole with the stud, how can i get the broken bolt out!!!!!!!! </TD></TR></TABLE>

try breaking all 6 bolts underneath. but i broke that same bolt and rode around for about a week after that. you can drill the bolt out. that takes a while. what i had to do was cut my whole entire stock lcas into pieces and then pry the bolt out. i had to do it to both of my lcas.

97ekb18b

ok so i should be ok to drive it till thursday then, yea i dont need to save the stock lcas so im willing to do whatever it takes to get them off, what a pita these bolts are

98 ej8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97ekb18b &raquo;</TD></TR><TR><TD CLASS="quote">ok so i should be ok to drive it till thursday then, yea i dont need to save the stock lcas so im willing to do whatever it takes to get them off, what a pita these bolts are</TD></TR></TABLE>

i dont know i wouldnt drive on it, ive seen them break on the other end of the bolt a few miles down the road and the whole control arm detaches from the trailing arm, then your F*cked, the wheel will slam into the wheel well and can be very dangerous

HondamanXxX

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I_Love_My_EJ8 &raquo;</TD></TR><TR><TD CLASS="quote">how can u tell the difference between a sir-g b18c and a type r spec? </TD></TR></TABLE>

Open her up.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97ekb18b &raquo;</TD></TR><TR><TD CLASS="quote">**** ok so today i went to install my blox lcas and i broke a bolt, the one closest to the rear drum, it snapped offat the head so i thought it would be ok to drive i took it for a drive and the wheel is leaning!!!!!! so i jacked it back up and put it were it needed to be and temp welded the hole with the stud, how can i get the broken bolt out!!!!!!!! </TD></TR></TABLE>

Welcome to the club.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by br0nx finest &raquo;</TD></TR><TR><TD CLASS="quote">
she passed homie, was buried LAST saturday.

i'm satisfied knowing she's in a better place.</TD></TR></TABLE>

Sorry again Luis

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ8 944 &raquo;</TD></TR><TR><TD CLASS="quote">i has a cat</TD></TR></TABLE>

I bought a Puggle today! w00t w00t

christiantequila

does anyone know where i can get a REAL mugen lip..

getting tired of how my fake *** one looks

ClubRacer

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by christiantequila &raquo;</TD></TR><TR><TD CLASS="quote">does anyone know where i can get a REAL mugen lip..

getting tired of how my fake *** one looks </TD></TR></TABLE>

you can't find them anywhere. I've tried.

christiantequila

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ClubRacer &raquo;</TD></TR><TR><TD CLASS="quote">

you can't find them anywhere. I've tried.</TD></TR></TABLE>

know where they have real good knock offs?

br0nx finest

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Beaver &raquo;</TD></TR><TR><TD CLASS="quote">

Sorry to hear, RIP </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Ej8 yaahh &raquo;</TD></TR><TR><TD CLASS="quote">

x2. Sorry to hear that man, like you said. Shes in a better place. </TD></TR></TABLE>

Thank you guys...and on a better note here's a pic for EJ8 squad!

JuanK20

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by br0nx finest &raquo;</TD></TR><TR><TD CLASS="quote">

Thank you guys...and on a better note here's a pic for EJ8 squad!

</TD></TR></TABLE>

br0nx finest

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JuanK20 &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

Thanks good sir, the filler piece and bumpers will be repainted and then I'll do a full shoot with my other things on for you guys

.Beaver

00ekcoupe

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sk8shorty012 &raquo;</TD></TR><TR><TD CLASS="quote">



What'cha need bro?</TD></TR></TABLE>
I'll hit you up!

Congrats on the new motor, wish I could afford one.

highneo

some random pics from the past month or so. put the old wheels back on for a bit. just got these new lugs and CRV cluster with ek9 bezel.

azn_ej8_jai

you are from philly too?
never seen your ej8 in philly before.