Honda-Tech - Honda Forum Discussion

Forced Induction Everything Forced Induction (Ex: Turbo Kits, Intercoolers, Blowoff valves, IC Piping, Turbo Manifolds)

Flanges, Adapter plates, Custom fabricating

Thread Tools
 
Search this Thread
 
Old 10-21-2005, 05:46 PM
  #1  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Flanges, Adapter plates, Custom fabricating
.


Modified by weiRtech at 10:14 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 10-27-2005, 07:34 PM
  #2  
Junior Member
 
Professor X's Avatar
 
Join Date: Mar 2004
Location: Atlanta, Georgia, United States
Posts: 112
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
I have a Greddy 18g from the DOHC kit that I want to use on my d16z6. I have the HF manifold and would like to use one of your adaptor plates. Do you have one available that fits this turbo? I believe it shares the same flange as the Nissan T25, but I'm not exactly sure. Thanks!

Excuse my ignorance, but what does the header flange do?
Professor X is offline  
Reply Like
Old 10-27-2005, 11:55 PM
  #3  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Re: Flanges, Adapter plates, Custom fabricating (Professor X)
.


Modified by weiRtech at 10:15 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 10-30-2005, 08:32 PM
  #4  
Honda-Tech Member
 
onequickcrx's Avatar
 
Join Date: Jan 2005
Location: killa, cali, usa
Posts: 312
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
pmed
onequickcrx is offline  
Reply Like
Old 10-31-2005, 12:03 AM
  #5  
Honda-Tech Member
 
beyondspexj's Avatar
 
Join Date: Oct 2003
Location: Sin City, NV
Posts: 2,903
Likes: 0
Received 0 Likes on 0 Posts
Default
bump for good quality seller. my adapter plate was excelent!!!
beyondspexj is offline  
Reply Like
Old 10-31-2005, 04:12 AM
  #6  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default
.


Modified by weiRtech at 10:15 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 11-08-2005, 12:17 AM
  #7  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Re: (weirRacing)
.


Modified by weiRtech at 10:15 AM 2/1/2006
weiRtech is offline  
Reply Like

Trending Topics

Old 11-08-2005, 12:18 PM
  #8  
Honda-Tech Member
 
katoeh2o's Avatar
 
Join Date: Jan 2003
Location: haleiwa, hi, usa
Posts: 191
Likes: 0
Received 0 Likes on 0 Posts
Default
Does your 35/38 mm wasegate flange fit on a turbonetics evolotion wasegate
katoeh2o is offline  
Reply Like
Old 11-08-2005, 04:33 PM
  #9  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Re: (katoeh2o)
.


Modified by weiRtech at 10:16 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 11-11-2005, 05:55 PM
  #10  
Honda-Tech Member
 
onequickcrx's Avatar
 
Join Date: Jan 2005
Location: killa, cali, usa
Posts: 312
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (weirRacing)
Received my T3/T4 adapter flange, Bad ***
onequickcrx is offline  
Reply Like
Old 11-24-2005, 05:26 PM
  #11  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Re: (onequickcrx)
.


Modified by weiRtech at 10:15 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 11-30-2005, 11:31 AM
  #12  
Honda-Tech Member
 
AdamITR's Avatar
 
Join Date: Apr 2000
Location: Upstate NY, NY, USA
Posts: 2,293
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
Sent IM
AdamITR is offline  
Reply Like
Old 12-11-2005, 05:20 AM
  #13  
Honda-Tech Member
 
adrenajunky's Avatar
 
Join Date: Jun 2004
Location: philadelphia, pa, USA
Posts: 393
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (AdamITR)
i have a garret t28 from the edelbrock kit that i wanted to use for a different aplication and i was wondering if u could make me a turbo outlet flange (to intercooler) that will match up to the turbo and then have a quick 90toward the right. and if u could how much. this is how the origional one looks, but it hangs to low for my crx.

bump for a usefull service
adrenajunky is offline  
Reply Like
Old 12-11-2005, 09:08 AM
  #14  
Honda-Tech Member
 
getnasty's Avatar
 
Join Date: Jul 2002
Location: IN A VAN DOWN BY THE RIVER
Posts: 2,673
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (adrenajunky)
pmed
getnasty is offline  
Reply Like
Old 12-15-2005, 01:33 AM
  #15  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Re: Flanges, Adapter plates, Custom fabricating (adrenajunky)
.


Modified by weiRtech at 10:15 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 01-02-2006, 07:56 PM
  #16  
 
rb30gtr's Avatar
 
Join Date: Jan 2006
Location: sydney, NSW, Australia
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
Hey,
I am after a t4 to t3 adaptor to suit my gt35r going onto a split pulse t4 manifold, does not need to be split pulse.
Got any t3 to t4 adaptor plates?
rb30gtr is offline  
Reply Like
Old 01-03-2006, 05:42 PM
  #17  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Re: Flanges, Adapter plates, Custom fabricating (rb30gtr)
.


Modified by weiRtech at 10:15 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 01-03-2006, 07:19 PM
  #18  
 
rb30gtr's Avatar
 
Join Date: Jan 2006
Location: sydney, NSW, Australia
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
LOL noob, cant use im or pm yet,
If you got one in stock SOLD!,
rb30gtr is offline  
Reply Like
Old 01-03-2006, 10:04 PM
  #19  
Honda-Tech Member
 
b16hybridsol's Avatar
 
Join Date: Apr 2003
Posts: 2,550
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (rb30gtr)
any special order flanges? like an h22 exhaust flange and a divided tang t3 flange
b16hybridsol is offline  
Reply Like
Old 01-04-2006, 12:18 AM
  #20  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Re: Flanges, Adapter plates, Custom fabricating (rb30gtr)
.


Modified by weiRtech at 10:16 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 01-07-2006, 07:28 AM
  #21  
 
streetsweeper21's Avatar
 
Join Date: Jan 2006
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
yo weirRacing i need one of the hf dsm adapter plate asap wat up hit me back on this thread caz i dont got pms if not hit me up on cordozar16 my sim s/n got cash in hand
streetsweeper21 is offline  
Reply Like
Old 01-08-2006, 04:03 PM
  #22  
Honda-Tech Member
 
JonnyCoupe's Avatar
 
Join Date: Jan 2003
Location: Tamworth, England, England
Posts: 455
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (streetsweeper21)
How thick are the B series flanges? Will you ship one to the UK please?

Thanks
JonnyCoupe is offline  
Reply Like
Old 01-09-2006, 12:10 AM
  #23  
OG Fabricator
Thread Starter
 
weiRtech's Avatar
 
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like on 1 Post
Default Re: Flanges, Adapter plates, Custom fabricating (streetsweeper21)
.


Modified by weiRtech at 10:16 AM 2/1/2006
weiRtech is offline  
Reply Like
Old 01-15-2006, 06:51 PM
  #24  
Honda-Tech Member
 
RCautoworks's Avatar
 
Join Date: Nov 2002
Location: Illinois
Posts: 17,227
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (weiRtech)
Back up because this guy is going to be getting a check from me soon.
RCautoworks is offline  
Reply Like
Old 01-15-2006, 09:46 PM
  #25  
 
stealthmode62's Avatar
 
Join Date: Jul 2004
Location: Farmington, MN, USA
Posts: 4,144
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Flanges, Adapter plates, Custom fabricating (90blackcrx)
Bump for my favorite Canadian. Aaron Weir.
stealthmode62 is offline  
Reply Like



Advanced Search
Quick Reply: Flanges, Adapter plates, Custom fabricating


Reply Closed Thread Share

All times are GMT -8. The time now is 12:59 AM.