Honda-Tech - Honda Forum Discussion

Forced Induction Everything Forced Induction (Ex: Turbo Kits, Intercoolers, Blowoff valves, IC Piping, Turbo Manifolds)

Flanges, Adapter plates, Custom fabricating

Thread Tools
 
Search this Thread
 
Old Oct 21, 2005 | 05:46 PM
Share
  #1  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Flanges, Adapter plates, Custom fabricating
.


Modified by weiRtech at 10:14 AM 2/1/2006
Reply
0
Old Oct 27, 2005 | 07:34 PM
Share
  #2  
Professor X's Avatar
Professor X
Junior Member
 
Joined: Mar 2004
Posts: 112
Likes: 0
From: Atlanta, Georgia, United States
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
I have a Greddy 18g from the DOHC kit that I want to use on my d16z6. I have the HF manifold and would like to use one of your adaptor plates. Do you have one available that fits this turbo? I believe it shares the same flange as the Nissan T25, but I'm not exactly sure. Thanks!

Excuse my ignorance, but what does the header flange do?
Reply
0
Old Oct 27, 2005 | 11:55 PM
Share
  #3  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Re: Flanges, Adapter plates, Custom fabricating (Professor X)
.


Modified by weiRtech at 10:15 AM 2/1/2006
Reply
0
Old Oct 30, 2005 | 08:32 PM
Share
  #4  
onequickcrx's Avatar
onequickcrx
Honda-Tech Member
 
Joined: Jan 2005
Posts: 312
Likes: 0
From: killa, cali, usa
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
pmed
Reply
0
Old Oct 31, 2005 | 12:03 AM
Share
  #5  
beyondspexj's Avatar
beyondspexj
Honda-Tech Member
 
Joined: Oct 2003
Posts: 2,903
Likes: 0
From: Sin City, NV
Default
bump for good quality seller. my adapter plate was excelent!!!
Reply
0
Old Oct 31, 2005 | 04:12 AM
Share
  #6  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default
.


Modified by weiRtech at 10:15 AM 2/1/2006
Reply
0
Old Nov 8, 2005 | 12:17 AM
Share
  #7  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Re: (weirRacing)
.


Modified by weiRtech at 10:15 AM 2/1/2006
Reply
0

Trending Topics

Old Nov 8, 2005 | 12:18 PM
Share
  #8  
katoeh2o's Avatar
katoeh2o
Honda-Tech Member
 
Joined: Jan 2003
Posts: 191
Likes: 0
From: haleiwa, hi, usa
Default
Does your 35/38 mm wasegate flange fit on a turbonetics evolotion wasegate
Reply
0
Old Nov 8, 2005 | 04:33 PM
Share
  #9  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Re: (katoeh2o)
.


Modified by weiRtech at 10:16 AM 2/1/2006
Reply
0
Old Nov 11, 2005 | 05:55 PM
Share
  #10  
onequickcrx's Avatar
onequickcrx
Honda-Tech Member
 
Joined: Jan 2005
Posts: 312
Likes: 0
From: killa, cali, usa
Default Re: (weirRacing)
Received my T3/T4 adapter flange, Bad ***
Reply
0
Old Nov 24, 2005 | 05:26 PM
Share
  #11  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Re: (onequickcrx)
.


Modified by weiRtech at 10:15 AM 2/1/2006
Reply
0
Old Nov 30, 2005 | 11:31 AM
Share
  #12  
AdamITR's Avatar
AdamITR
Honda-Tech Member
 
Joined: Apr 2000
Posts: 2,293
Likes: 0
From: Upstate NY, NY, USA
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
Sent IM
Reply
0
Old Dec 11, 2005 | 05:20 AM
Share
  #13  
adrenajunky's Avatar
adrenajunky
Honda-Tech Member
20 Year Member
 
Joined: Jun 2004
Posts: 393
Likes: 0
From: philadelphia, pa, USA
Default Re: Flanges, Adapter plates, Custom fabricating (AdamITR)
i have a garret t28 from the edelbrock kit that i wanted to use for a different aplication and i was wondering if u could make me a turbo outlet flange (to intercooler) that will match up to the turbo and then have a quick 90toward the right. and if u could how much. this is how the origional one looks, but it hangs to low for my crx.

bump for a usefull service
Reply
0
Old Dec 11, 2005 | 09:08 AM
Share
  #14  
getnasty's Avatar
getnasty
Honda-Tech Member
 
Joined: Jul 2002
Posts: 2,673
Likes: 0
From: IN A VAN DOWN BY THE RIVER
Default Re: Flanges, Adapter plates, Custom fabricating (adrenajunky)
pmed
Reply
0
Old Dec 15, 2005 | 01:33 AM
Share
  #15  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Re: Flanges, Adapter plates, Custom fabricating (adrenajunky)
.


Modified by weiRtech at 10:15 AM 2/1/2006
Reply
0
Old Jan 2, 2006 | 07:56 PM
Share
  #16  
rb30gtr's Avatar
rb30gtr
 
Joined: Jan 2006
Posts: 2
Likes: 0
From: sydney, NSW, Australia
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
Hey,
I am after a t4 to t3 adaptor to suit my gt35r going onto a split pulse t4 manifold, does not need to be split pulse.
Got any t3 to t4 adaptor plates?
Reply
0
Old Jan 3, 2006 | 05:42 PM
Share
  #17  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Re: Flanges, Adapter plates, Custom fabricating (rb30gtr)
.


Modified by weiRtech at 10:15 AM 2/1/2006
Reply
0
Old Jan 3, 2006 | 07:19 PM
Share
  #18  
rb30gtr's Avatar
rb30gtr
 
Joined: Jan 2006
Posts: 2
Likes: 0
From: sydney, NSW, Australia
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
LOL noob, cant use im or pm yet,
If you got one in stock SOLD!,
Reply
0
Old Jan 3, 2006 | 10:04 PM
Share
  #19  
b16hybridsol's Avatar
b16hybridsol
Honda-Tech Member
 
Joined: Apr 2003
Posts: 2,550
Likes: 0
Default Re: Flanges, Adapter plates, Custom fabricating (rb30gtr)
any special order flanges? like an h22 exhaust flange and a divided tang t3 flange
Reply
0
Old Jan 4, 2006 | 12:18 AM
Share
  #20  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Re: Flanges, Adapter plates, Custom fabricating (rb30gtr)
.


Modified by weiRtech at 10:16 AM 2/1/2006
Reply
0
Old Jan 7, 2006 | 07:28 AM
Share
  #21  
streetsweeper21's Avatar
streetsweeper21
 
Joined: Jan 2006
Posts: 1
Likes: 0
Default Re: Flanges, Adapter plates, Custom fabricating (weirRacing)
yo weirRacing i need one of the hf dsm adapter plate asap wat up hit me back on this thread caz i dont got pms if not hit me up on cordozar16 my sim s/n got cash in hand
Reply
0
Old Jan 8, 2006 | 04:03 PM
Share
  #22  
JonnyCoupe's Avatar
JonnyCoupe
Honda-Tech Member
 
Joined: Jan 2003
Posts: 455
Likes: 0
From: Tamworth, England, England
Default Re: Flanges, Adapter plates, Custom fabricating (streetsweeper21)
How thick are the B series flanges? Will you ship one to the UK please?

Thanks
Reply
0
Old Jan 9, 2006 | 12:10 AM
Share
  #23  
weiRtech's Avatar
weiRtech
Thread Starter
OG Fabricator
 
Joined: Feb 2005
Posts: 1,864
Likes: 1
From: Burlington, Ont., Canada
Default Re: Flanges, Adapter plates, Custom fabricating (streetsweeper21)
.


Modified by weiRtech at 10:16 AM 2/1/2006
Reply
0
Old Jan 15, 2006 | 06:51 PM
Share
  #24  
RCautoworks's Avatar
RCautoworks
Honda-Tech Member
 
Joined: Nov 2002
Posts: 17,227
Likes: 2
From: Illinois
Default Re: Flanges, Adapter plates, Custom fabricating (weiRtech)
Back up because this guy is going to be getting a check from me soon.
Reply
0
Old Jan 15, 2006 | 09:46 PM
Share
  #25  
stealthmode62's Avatar
stealthmode62
 
Joined: Jul 2004
Posts: 4,144
Likes: 0
From: Farmington, MN, USA
Default Re: Flanges, Adapter plates, Custom fabricating (90blackcrx)
Bump for my favorite Canadian. Aaron Weir.
Reply
0



Advanced Search

All times are GMT -8. The time now is 02:58 PM.