what turbo?
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: ...bottom of the bottle
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
what turbo?
ok I know this question is prolly asked a lot in here but I am new to this turbo stuff.
I am looking for a turbo for my del sol si (d16z6)...I have been piecing the kit together and so far i have...
spearco intercooler, greddy type s BOV, DRAG manifold and downpipe
I am going to run the AFC hack for fuel management and I already have the VAFC
Also on my car i have ported intake mnaifold and throttle body, cam gear, pullies and other little things.
I am looking for as much power as I can get and at some point in the future the motor will be built, but i dont know when.
SO my question is...should I go with a straight T3..or a T3/T4...and what trim would be best?
Thanx for ur help guys
I am looking for a turbo for my del sol si (d16z6)...I have been piecing the kit together and so far i have...
spearco intercooler, greddy type s BOV, DRAG manifold and downpipe
I am going to run the AFC hack for fuel management and I already have the VAFC
Also on my car i have ported intake mnaifold and throttle body, cam gear, pullies and other little things.
I am looking for as much power as I can get and at some point in the future the motor will be built, but i dont know when.
SO my question is...should I go with a straight T3..or a T3/T4...and what trim would be best?
Thanx for ur help guys
#2
Member
Join Date: Aug 2001
Location: Tempe, AZ, USA
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: what turbo? (DevilSolSi)
How much power are you looking aat making? A straight T3 (.48 A/R Stage I & .60 A/R Super 60) will eaily support 250 whp.
http://www.store.yahoo.com/sr20perfo...garrettt3.html
It will have pretty quick spool and give nic top end on a SOHC.
A T3/T04E (.48 A/R Stage III & .60 A/R 57 Trim) will easily support 300 whp.
http://www.store.yahoo.com/sr20perfo...ettt3t04e.html
It won't spool as quick as the T3, but it will have very nice top end.
http://www.store.yahoo.com/sr20perfo...garrettt3.html
It will have pretty quick spool and give nic top end on a SOHC.
A T3/T04E (.48 A/R Stage III & .60 A/R 57 Trim) will easily support 300 whp.
http://www.store.yahoo.com/sr20perfo...ettt3t04e.html
It won't spool as quick as the T3, but it will have very nice top end.
Thread
Thread Starter
Forum
Replies
Last Post