Hey guys, my boy has a turbonetics turbo laying around from a corrado. The specs are as follows the turbo is a T3/T04e 60 trim. My question is what would I need to do to get this to fit on my em1. Its a brand new turbo and I want to use it if possible. Any ideas???

 

you need every other component of a turbo kit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbo-charged &raquo;</TD></TR><TR><TD CLASS="quote">you need every other component of a turbo kit.</TD></TR></TABLE>

hahahaha

 

no **** but since its for a corrado do I get all the other stuff for a b16a2 fitment?

 

get everything for a EM1, but make sure the manifold is T3 on the turbo side

 

thanks its nice to know there are some people in here that have usefull insight

 

just get any manifold for a B-series with the T3 flange and you will be good to go......

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedEG6 &raquo;</TD></TR><TR><TD CLASS="quote">just get any manifold for a B-series with the T3 flange and you will be good to go...... </TD></TR></TABLE>

No, he'll have to get the t3 to corrado adapter plate. ssautochrome should have them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Snafubmx234 &raquo;</TD></TR><TR><TD CLASS="quote">No, he'll have to get the t3 to corrado adapter plate. ssautochrome should have them.</TD></TR></TABLE>

You have no clue of what your talking about

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mikeycivic &raquo;</TD></TR><TR><TD CLASS="quote">The specs are as follows the turbo is a T3/T04e 60 trim.</TD></TR></TABLE>

Its a T3/T04 so there is no adapter plate needed


Modified by BoostedEG6 at 10:26 AM 10/10/2006