what is a code 19????
#2
Re: what is a code 19???? (turboex)
#4
Junior Member
Join Date: Dec 2001
Location: Jacksonville, FL, USA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Re: what is a code 19???? (turboex)
I had that same code with my P28chipped ecu. It turned out to be that the ecu is automatic and whoever chipped it didn't finish it for a 5spd. You are gonna have to get it done. As for how its done, I have no clue
#5
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: minot, ND, usa
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
Re: what is a code 19???? (TTWS6.)
I have a 5speed. how would i tell if its an auto ecu? I got it from payn tech just a few days ago, pre wired for hondata
#6
Honda-Tech Member
Join Date: Nov 2001
Location: San Jose, CA, USA
Posts: 3,492
Likes: 0
Received 0 Likes
on
0 Posts
Re: what is a code 19???? (turboex)
Found this somewhere:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">This will work for usdm OBD-1 ECUs:
Read the code on it. The 2nd to last # on an automatic ECU will have a 5.
If it is anything but a five then it is a manual ECU.
Jdm OBD-1 ECUs:
Reade the code on it.. if the last 3 digits are 900 or 901 it is an automatic ECU. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">This will work for usdm OBD-1 ECUs:
Read the code on it. The 2nd to last # on an automatic ECU will have a 5.
If it is anything but a five then it is a manual ECU.
Jdm OBD-1 ECUs:
Reade the code on it.. if the last 3 digits are 900 or 901 it is an automatic ECU. </TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post